Manual

Getting Started
1 Connect the AC power cord to an AC
outlet.
2 Turn on your TV and AV receiver.
3 Select the appropriate input source of the
AV receiver connected to this unit. Refer
to the manual supplied with your AV
receiver for details.
4 Turn on this unit.
S Set the TV to the correct Video IN
channel. (e.g. EXT1, EXT2, AV1, AV2,
AUDIO/VIDEO, etc. Refer to the manual
supplied with your TV for details.
The front panel display lights up and the
default screen appears on the TV.
When "SCREEN SAVER" is set to
"OFF" (see page 22):
The background or the paused picture is
displayed for 30 minutes.
This unit is set to the standby mode.
Setting a color system for your
TV
This unit is compatible with both NTSC
and PAL video formats. Select the color
system that matches your TV.
About the auto standby function
This unit is automatically set to the standby
mode when disc playback is stopped or
paused for more than 30 minutes.
When "SCREEN SAVER" is set to
"ON" (see page 22):
The background isdisp{ayedwhen disc
playbackisstopped or the paused picture
isdisplayedfor 15 minutes.
OR
Background Example of a
paused picture
The screen saver is displayed for 1S minutes.
1 Press SETUP.
2 Press I_ repeatedly to select "VIDEO
SETUP PAGE'.
3 Press A/_' to highlight [TV TYPE], and
then press I_.
4 Press A/T to highlight one of the following
options.
This unit is set to the standby mode.