Manual

Setup Menu
CD upsarnpEng
Use this feature to convert your music CD
to a higher sampling rate using
sophisticated digital signal processing for
better sound quality. If you activate the
upsampling function, this unit automatically
switches to the stereo mode.
1 In "AUDIO SETUP PAGE", press A/T to
highlight [CD UPSAMPLING], and then
press I_
OFF
Select this to disable CD-upsampling.
88.2kHz
Select this to convert the sampling rate of
CDs to twice that of the original.
176.4kHz
Select this to convert the sampling rate of
CDs to four times that of the original.
2 Press ,L/Y to select a setting, and then
press ENTER/OK to confirm your
selection.
ON
i
Select this to level out the volume, This
feature is only available for movies with the
Dolby Digital mode.
OFF
Select this when you want to enjoy the full
dynamic range of surround sound,
Press A/V to select a setting, and then
press ENTER/OK to confirm your
selection.
1 Press SETUP.
2 Press _ / _ to select the "Video Setup"
icon,
3 Press ENTE_OK to confirm your
selection.
Note:
- Thissettingisanlyvalidforsignalsoutputat
the analogjacks.
Night mode
In the night mode, high volume output is
softened and low volume output is brought
upward to an audible level. It is useful when
you watch your favorite action movie
without disturbing others at night.
In "AUDIO SETUP PAGE", press A/V
to highlight [NIGHT MODE], and then
press _.
TV type
Use this feature to select a color system
that matches your TV. For details, see
"Setting a TV type and display" on page 9.
24