Manual

Preparation
Inserting batteries into the
Remote Control
| Open the batterycove_
2 Insert ba_edes (AA size)with the co_ect polanty
as ind cared bythe + and -- symbols inside the
battery compartmenL
3 Close the cover,
CAUTION!
- Remove batteries if they are exhausted or
not to be used for a long time.
- Do not use old and new or different types
of batteries in combination.
- Batteries contain chemical substances, so
they should be disposed off properly and
kept away from children.
Using the Remote Control
• Direct the remote control at the remote sensor
of the player.
• Do not drop the remote control.
• Do riot leave the remote control near- extremely
hot or humid places.
• Do not spill water or put anything wet on the
remote control.
NTSC/PAL Conversion
DVD discs am recorded according to color
system eg. NTSC and PAL. Your TV also operates
accord ng to a color system.
This DVD player is compat ble with NTSC and
PAL. To play on this DVD player, the color
system of the DVD disc, the TV and the DVD
player should match. If all three are not the same,
the DVD may play in only black and white, the
Dcture may roll continuously or the picture may
appear distorted,
To activate the conversion, refer to page 1I.
1
2
3
4
Switching On
Connect the AC power cord to the power outlet.
Switch on the TV and DVD player,
Select the correct input channel at your TV and
set the nput source at your AV recover to DVD.
-l_ The player display Ights up and the default
screen appears on the TV.
If you are using an external equipment (eg. audo
system or receiver), turn them on and select the
appropnate input source that was used to
connect to the player output. Refer to the
equ pment owner's manual for detail.
Note:
- If you do not have a proper picture or sound, refer
to Troubleshooting' section.
8