OWNER'S MANUAL
RISK OFELECTRIC SHOCK DONOTOPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. 1 Read these instructions. 2 Keep these instructions. 3 Heed all warnings. 4 Follow all instructions. 5 Do not use this apparatus near water. 6 Clean only with dry cloth. 7 Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
,l_l..,[e]:tl',_hVll_'f:y.7.._liihV[_';ll:tl[Nl[e]iv[_ FCC INFORMATION 1. IMPORTANT NOTICE : DO NOT MODIFYTHIS UNIT! This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications not expressly approved by Yamaha may void your authority, granted by the FCC, to use the product. 2. IMPORTANT : When connecting this product to accessories and/or another product use only high quality shielded cables.
1 2 To assure the finest performance, please read this manual carefully. Keep it in a safe place for future reference. Install this unit in a well ventilated, cool, dry, and clean place with at least 5 cm above, behind and on the both sides of this unit - away from direct sunlight, heat sources, vibration, dust, moisture, and/or cold.
• 5-Disc Video, Auto-changer for playing audio CD and Video CD • CD-R and CD-RW • MP3 format • PLAYXCHANGE; playing • DVD- Disc changing capability while and 1 COAXIAL digital outputs Compatible and DTS decoders with almost Easy operation • Multi-speed playback • Progressive video output • 1 2 2 2 4 4 6 REMOTE CONTROL .................................. 7 Installing batteries in the remote control ...... 7 Using the remote control .............................. 7 CONNECTIONS ...
Check that the following items are included in your package. Remote control Batteries (AA, R06, UM-3) I Do_ NI 2U 3 {23 CD {23 CD C:3 U_ (Australia model) (U.S.A. and Canada models) This DVD changer is designed of disc only. Never attempt into this unit because AC power cord I Do_c I JDDD RCA pin cable (audio/video) for use with following types to load any other type of disc it may damage DIGITAL Manufactured this unit.
• Region management This DVD player number marked of this unit), is designed information to meet DVD standard on the disc packages. this unit refuses If the number that supports region management does not match this unit's region system. number Check the regional code (see the below table or the back to play that disc. Model U.S.A.
Front Panel ID _W NAVURALBOUND DW A_DIO/WDEOPLAYERDVD--C×, I i I I O (U.S.A. model) Remote Control POWER ® f Press to turn the power on and off. 0 ® @ @ @ -@ 0 0 @ @ @ © @ @ 0 ® @ @ © @ @ O @ @ @ @ POWER _/i Press to switch the unit to the standby (standby/on) on. Standby mode In this mode, this unit will consume power in order to receive remote control. 0 0 Disc tray on this tray. _ (OPEN/CLOSE) Press to open and close the disc tray. 0 PLAYXCHANGE (p.
,_IoJAvl i r.{ol ll r.t .,-1.7 ..,-lr.t .,-llVtl,,],.,-itl l l l e] O PLAY MODE Press to switch normal _) ON SCREEN among random play, program play, and REPEAT (p.17) _) MARKER _) RETURN (p.20) _) SUBTITLE _) <_, (p.16) _) Numeric Use to select (p.16) _) TOP MENU screen when operating in the menu Cursor (p.13) track, etc. a specific mode or a setting. _) VIDEO OFF (p.15) (p.14) _) PAGE (p.15) screen contained in the disc.
II_ilJAVll;[tJ!!'l_:l'l_i+[_;lle] mPEG PCm V.S.S. REP 1 5 DISC A-B GROUP TITLETRACKCHAP .,'"_, .,'"., .,'"_, !!i IIi .,'"., !! IiI lii _,'"., i! UU D. MIX P.PCMMLT.CH III .,'"_, !! ill .,'"., !! .,'"_, !i IIi IiI .,'"., !! _,'"., i! lii .,'"., !! IiI ill D _,'"., i! III ! ........... r............ ®,® ® O Disc type indicators the type of" disc. For example, Indicates lights up when playing a DVD-Audio DVD and AUDIO disc.
[] Turn the remote control over and slide the battery compartment the arrow. If the remote control operates • Remove the batteries [] Insert the batteries (AA, R06, UM-3 type) according the polarity markings on the inside of the battery compartment. [] Close the battery compartment only when it is close to the unit, the batteries • Use only AA, R06 or UM-3 batteries tbr replacement. • Be sure the battery polarity is correct.
Never connect this unit and other equipment Be sure all connections connected. are made correctly, Also refer to the instructions to power observing supply until all connections the color-coding of the equipment of terminals have been completed. of both this unit and the equipment to be to be connected. • Digital outputs This unit has COA×IAL terminals.
ff your AV amplifier (U.S.A. model) has video terminals, connect amplifier (and then to your video monitor) use one video monitor for several different (LD, VCR etc.) by simply selector switching your so that you can video sources the input source of your amplifier. This unit has three types of video output of them in accordance equipment terminals. with the input terminals Use one of the to be connected. • Do not connect this unit to a video monitor through a video cassette recorder.
These terminals are used for custom installation system that transmits remote control signals via cables. Connect this unit's REMOTE CONTROL IN to the Remote control output By connecting another piece of the control this unit's of equipment's you can "also operate control. unit of your system. REMOTE that equipment This unit is also equipped CONTROL OUT to control input terminal, Remote with the system with RS232C terminal. remote Consult your dealer for details. (U.S.A.
To play a disc properly, equipment • connected you need to adjust If your AV amplifier digital setting).
DISC SKIP PLAYXCHANGE • To stop playback Press _ (STOP). PLAY STOP This unit memorizes where _ (STOP) was pressed (_ indicator flashes on the display). When you press > (PLAY) in this status, playback resumes from where it was stopped. To clear the memory, press _ (STOP) once more so that the indicator goes off. • The memory retains even after tuming this unit to the standby mode. However, if you turn the unit off by pressing POWER on the front panel, the memory will be cleared.
PLAY PAUSE • Skip Press SKIP _ (or _<_) on the remote forward (or backward). Press once for each chapter (track) control to skip to be skipped. or Turn the jog dial _<, forward c>_ to the right (or to the left) to skip (or backward). One click skips one chapter (track). lii_!_i!_i!i_ii_ii_i_i_!_i_ii_i_ii_i_iii_i_iiiii_i_i_iiiii_i_i_i_iii_i_iiiii_i_i_iiiii_i_i_i_iii_i_ • When playing a VCD with playback control, skip operation may not function as described above.
Discs may contain multiple audio tracks, subtitles, index and bonus materials such as movie trailers and cast information, etc. And many of them have menu screens that enable you to control these features. This section gives you general instruction about how to operate these screens. However, the operation methods may differ depending on the disc. [] PressTOP MENU or MENU during playback to show menu screen. • With some discs, menu screen appears automatically when you start playback.
This section explains about some features particular to DVD-Audio. Though most of the content selection can be controlled using a disc's menu like DVD-Video, there exists in a DVD-Audio the unit called 'group' that is something equivalent to DVD-Video's 'title'. • To play a track on a specific [] Press The group and track monitor. [] Cursor buttons, ENTER icons appears on the video Press the cursor buttons (£,V) to select a group number and press ENTER.
_ :Y__k_ foloJ "J_ -Y__ WllolJ_ Some discs are encoded gual subtitles etc. to see which AUDIO _LE with several or multiple camera feature audio angles. multilin- is supported. • Audio tracks Different audio track languages and/or selected if available on the disc. RETURN tracks, Refer to disc jacket Press AUDIO The Audio • Numeric buttons • formats can be during play. track icon appears on the video monitor.
This function allows you to play your desired chapter, track or disc repeatedly. • Press REPEAT during Each time this button as follows. playback. is pressed, repeat mode The name of the selected scrolls once on the multi-information corresponding @ CHAPTER indicators REPEAT: changes repeat mode display and the light up. The current chapter is played repeatedly. @ r: H AF'r, ElR R ElF' :::: _[R AC i::: RE F'EA ;r, t, (b5 _?iTLE: t, REF'EI:FT] F', T ,Z"i-" ! © ....... rill.
i lllllllllIlIlIlI l l l l l IlIlIlIlIlIll ii//il//////li l l l l llIlIlIlIlIlIlliIt This function allows you to specify between them repeatedly. [] Press A-B during two points and play play at the point where want to start A-B repeat. 'REP' and 'A-' light up and 'B' flashes [] Press A-B at the point where you on the display. you want to end A-B repeat. 'REP' and 'A-B' of the section appear between on the display and repeat play point A and B starts.
_',]..t_Wlgl¥1Av[elllM:l..tf,_|'l,.",]_e]ll_v[e,] You can enjoy listening to your favorite tracks selected one or more discs in any desired order by programming tracks. PLAY buttons [] Press _ (STOP) [] Press PLAY MODE (PLAY) [] Press • DISC [] Press numeric t 23_45 ..... "" ......... buttons press GROUP to to select the track. • To program a whole appears Pressing so far.
This feature allows you to mark up to 5 points so that you can quickly return to those points later. [] MARKER Press MARKER. The marker icon appears on the screen. [] Press the cursor buttons (% _) to select one of five asterisks. The selected asterisk is highlighted. [] Press ENTER. The selected asterisk turns to be the bookmark number. Cursorbuttons(<,_), ENTER • To recall a bookmarked scene Press the cursor buttons (<, _) to select a bookmark number and press ENTER.
YOUcan control various items using on-screen menu bar. [] _il_ b'i-_oL,'_a _itm u Press ON SCREEN. Each time ON SCREEN is pressed, the menu bar changes as below. 4, ® Icons for disc menu @ Icons for player menu ® Shuttle screen off Off [] Icons for player menu $ $ Press the cursor buttons (% >) to item you wish to adjust. The selected item is highlighted. • Icons for player menu has 4 different below.
Ile]_vH..'[_.;t:l:&Vll_l:&Vll !i ........ ...... example: DVD-Video Title number Track Angle number number Playback Chapter Group control Indicates or off'. number number Page whether playback control is on number [] Language Time index (hour:minute:second) You can start play from by specifying Changing the desired the elapsed the time Track elapsed Track remaining point time.
• Play mode menu • Audio menu example: DVD-Video example: DVD-Video • n _ A-B repeat (_ p.18) [ENTER] (start point) _ [ENTER] (finish point) To cancel Virtual surround mode Allows you to enjoy surround-like effect without surround speakers when playing a disc encoded with multi-channel audio track (may not effective with some discs). You can also enjoy the feature connecting headphones to your AV amplifier.
When PROGRESSIVE Digital picture mode To select the picture mode: [A,V] N: Normal models) Digital picture mode To select the picture mode: [A,V] N: Normal C: Cinema image (suited for movie viewing) U: User mode C: Cinema image (suited for movie viewing) To change the user mode 1 Select User mode and press E>. 2 Press (<%E>)to select the item you wish to change. 3 Press (A,V) to change the setting. The following items are also displayed when 'ou select 'U'. -Contrast is on (U.S.A.
With the setup menu, you can change this unit's system defaults to suit your preference and your home theater system. Some items must be adjusted to play a disc properly. This section shows common procedures (some items require additional steps). Use the remote control to operate the setup menu. [] ENTER Press SET UP while playback is stopped. The menu screen appears on the video monitor. Press the cursor buttons (% _) to select a menu group. There are five menu groups.
IFl=tlqilt_/_i'P The below chart shows the menu groups and each items. In the 'Options' column, the factory settings are underlined. Menu groups Disc See Items Audio _ Select the preferred audio track language. p.27 and 28 for details. Subtitle _ Select the preferred subtitle language. Menus _ Select the preferred disc menu language. Ratings Set a ratings level to limit DVD-Video play. See p.28 for details. Options (U.S.A.
Menu Items groups Audio Options Dolby Digital _ Decide the signal type that output from this unit's digital outputs. Select 'Bitstream' when connected device has Dolby Digital decoder. Select 'PCM' when not. Bitstream DTS Digital Surround _ Decide the signal type that output trom this unit's digital outputs. Select 'Bitstream' when connected device has DTS decoder. Select 'PCM' when not. PCM Bitstream MPEG _ _ (Australia model) Decide the signal type that output from this unit's digital outputs.
!ii!i ii:i!! i ! !!!!ii@! !iit!/!/!/!/!i!!i!i}iii3!!2 @!/!!!iii!iiiii!i !3:1 !lit!I! .... Depending on software capability, you can prevent discs or scenes with objectionable material from being played according to your desired rating. You can select the level and lock it by designating password. Level 8 All DVDs can be played. Level 7 to 1 Level of restriction becomes severer as the number gets smaller. ENTER Level 0 All DVDs cannot be played.
Main (L) Main (R) i • Output Change mode of" each speaker the settings in accordance with your speaker system. Exit H Press the cursor buttons (% >, £,v) buttons (£,v) to select a speaker and press ENTER. IVJ Press the cursor ENTER. Example: Left surround @ when the speaker Test signal i to select the setting and press (rear) speaker is not used (B) when using a large speaker capable output.
If this unit fails to operate normally, is not listed in the PROBLEM center. PROBLEM This unit on when switch is This unit normally. fails to turn the POWER pressed. does not work Playback does not start. check the following column, points disconnect the power POSSIBLE CAUSE to determine the fault can be corrected, your authorized WHATTO YAMAHA Refer to Page DO Firmly connect the power cord.
iii'Pt:[_:_Wiqqlffi' PROBLEM POSSIBLE CAUSE No sound when playing a disc encoded with DTS. Incorrect setting(s) at the audio section of 'Setup menu' on this unit or at 'input mode' on your amplifier. No sound from some speakers. With some DVD-Audio, specified by the disc. Refer to Page WHAT TO DO Select proper settings. 26, 27 output channels are Incorrect 'Speaker settings'. (when 6CH DISCRETE outputs are connected to your amplifier) Change the settings to suit your speaker system.
• Audio section Frequency • General response Power supply: DVD (48 kHz sampling): ......................... 2 Hz to 22 kHz [U.S.A. DVD (96 kHz sampling): ......................... 2 Hz to 44 kHz [Australia DVD Audio (192 kHz sampling): ............. CD, Video CD: .............................................. Harmonic distortion S/N ratio: ................................................. Dynamic + noise 2 Hz to 88 kHz 2 Hz to 20 kHz (1 kHz): .......................