00cv_DV-C6860_G.fm Page 1 Thursday, March 30, 2006 5:04 PM G DVD CHANGER LECTEUR DE DVD CHANGEUR DV-C6860 DV-C6860 OWNER’S MANUAL MODE D’EMPLOI BEDIENUNGSANLEITUNG 2006 YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A. YAMAHA CANADA MUSIC LTD. 135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA YAMAHA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR. 22-34, 25462 RELLINGEN BEI HAMBURG, GERMANY YAMAHA ELECTRONIQUE FRANCE S.A.
Important notes for users in the U.K. Mains plug This apparatus is fitted with an approved 13 Amp plug. To change a fuse in this type of plug proceed as follows: 1 Remove fuse cover and fuse. 2 Fix new fuse which should be a BS1362 5 Amp, A.S.T.A. or BSI approved type. 3 Refit the fuse cover. If the fitted plug is not suitable for your jack outlets, it should be cut off and an appropriate plug fitted in its place. If the mains plug contains a fuse, this should have a value of 5 Amp.
CLASS 1 LASER PRODUCT LASER KLASSE 1 PRODUKT LUOKAN 1 LASERLAITE KLASS 1 LASER APPARAT PRODUIT LASER DE CLASSE 1 UCT UKT R PROD E 1 PROD LASE SE RLAIT S1 RATSE 1 CLASR KLAS 1 LASE CLAS R APPA LASE AN LASE R DE LUOKS 1 LASE KLAS UIT PROD CAUTION VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN.
CAUTION: READ THIS BEFORE OPERATING THIS UNIT. 1 To assure the finest performance, please read this manual carefully. Keep it in a safe place for future reference. 2 Install this unit in a well ventilated, cool, dry, clean place — away from direct sunlight, heat sources, vibration, dust, moisture, or cold. In a cabinet, allow about 2.5cm (1 inch) of free space all around this unit for adequate ventilation.
Contents Region codes ........................................................................... 2 Supplied accessories............................................................... 2 Notes on discs ........................................................................ 2 Cleaning discs .......................................................................... 2 Patent information.................................................................. 2 Functional Overview Front panel.........................
Introduction Thank you for purchasing this unit. This Owner’s Manual explains the basic operation of this unit. Region codes DVD discs must be labeled ALL regions or Region 2 in order to play on this unit. You cannot play discs labeled for other regions. ALL 2 Supplied accessories – Remote control – Two batteries (AA, R06, UM-3) for the remote control – Audio pin cable – Video pin cable – Owner’s Manual – Do not use any non-standard shaped discs (heart-shaped, etc.).
Functional Overview 2 1 0 9 1 Disc tray Loads up to 5 discs in the disc tray. 2 / (OPEN/CLOSE) Opens or closes the disc tray. 3 PLAYXCHANGE Reloads or unloads discs without interrupting current disc playback. 4 9 (STOP) Stops playback. 5 B/; (PLAY/PAUSE) Starts or pauses playback. 6 R/T Searches forward.* Moves to the next chapter or track. English Front panel 7 6 5 4 3 8 7 S/Q Searches backward.* Moves to the previous chapter or track.
Functional Overview Rear panel VIDEO Y AUDIO OUT 1 COAXIAL COMPONENT DIGITAL OUT PR /CR 2 PB /CB VIDEO OUT 3 4 5 1 AUDIO OUT (L, R) jacks Connect to the audio input jacks of your AV receiver or stereo system. 2 DIGITAL OUT - COAXIAL jack Connect to the coaxial input jack of your AV receiver. 3 VIDEO OUT - COMPONENT (Y, PB/CB, PR/CR) jacks Connect to the component input jacks of your AV receiver. 6 4 AV terminal Connect to SCART input terminal of your TV.
Functional Overview English 6 STOP (9) Remote control Stops playback. 7 SUBTITLE Selects the subtitle language. 1 8 ANGLE 1 2 3 4 5 6 7 8 2 TOP MENU RETURN 3 MENU 9 ON SCREEN w SETUP e 0 ENTER 4 Selects the DVD camera angle. q r 9 REPEAT Repeats the chapter, track, title, disc or all discs. 0 A-B Repeats a specific segment.
Connections General notes on connections Be sure to turn off this unit and unplug the power supply cable before you make or change connections. • Depending on the component you wish to connect, there are various ways to make connections. Possible connections are described below. • Refer to the manuals of your other components as necessary to make the best connections. • Do not connect this unit via your VCR. The video quality could be distorted by the copy protection system.
Connections If your AV receiver has video output jacks, connect your receiver and then your TV so that you can use one TV for several different video sources (LD, VCR, etc.) by simply switching the input source selector of your AV receiver. This unit has three types of video output jacks. Use the one that corresponds to the input jacks of the component to be connected. If your TV has only a terminal for video input, you can connect the TV directly to this unit.
Getting Started Step 1: Inserting batteries into the remote control Using the remote control 3 Remote control sensor 1 2 1 Open the battery compartment. 2 Insert the two supplied batteries (AA, R06, UM-3) following the indications (+/–) inside the compartment. 3 Close the cover. Notes: – Insert batteries correctly according to the polarity markings (+/–). The batteries inserted in the opposite direction may leak. – Replace the exhausted batteries immediately with new ones to prevent a leakage.
Getting Started 1 Connect the AC power cord to an AC outlet. 2 Turn on your TV and AV receiver. 3 Select the appropriate input source of the AV receiver connected to this unit. Refer to the manual supplied with your AV receiver for details. 4 Turn on this unit. 5 Set the TV to the correct Video IN channel (e.g. EXT1, EXT2, AV1, AV2, AUDIO/ VIDEO, etc. Refer to the manual supplied with your TV for details). ➜ The front panel display lights up and the default screen appears on the TV.
Getting Started PAL Select this if the connected TV is a PAL system TV. It will change the video signals of NTSC discs and output them in PAL format. MULTI Select this if the connected TV is compatible with both NTSC and PAL formats (such as a multi-system TV). The output format will be in accordance with the video signals of the disc. NTSC Select this if the connected TV is an NTSC system TV. It will change the video signals of PAL discs and output them in NTSC format.
Getting Started You can select your own preferred language settings. This unit automatically switches to your preferred language whenever you load a disc. If the selected language is not available on the disc, the default language of the disc will be used instead. The OSD language in the system menu remains once selected.
Disc Operations IMPORTANT! – If the inhibition icon ( or X) appears on the TV screen when a button is pressed, the function for that button is not available on the current disc or at the current time. – Depending on the DVD or VIDEO CD disc, some operations may operate differently or be restricted. – Do not push on the disc tray or put any objects other than discs on the disc tray. Doing so may cause the disc player to malfunction.
Disc Operations • Press S / T or use the numeric buttons (0-9) to select a track/chapter number. • During repeated playback of a track/ chapter, press S / T to replay the same track/chapter. Searching backward/forward 1 Press and hold S / T or press 1 / 2. 2 While searching, press S / T or 1 / 2 repeatedly to select the desired speed. 3 To resume normal playback, press PLAY (B). Notes: – 1 / 2 key may not be available with some discs.
Disc Operations Repeating a section within a chapter/track 1 While playing a disc, press A-B at the desired starting point. 2 Press A-B again at the desired end point. • A and B can only be set within the same chapter/track. ➜ The selected section repeats continuously. 3 To exit from the sequence, press A-B. Shuffle (except DVD/VCD/SVCD) With the shuffle function, you can play tracks in a random order.
Disc Operations This function allows you to enlarge or lessen the picture on the TV screen and pan through the enlarged picture. 1 During playback, press ZOOM repeatedly to display the picture at different scales. • Use 1 / 2/3 / 4 to pan through the enlarged picture. ➜ Playback continues. 2 Press ZOOM repeatedly to return to the original size. On-screen display (OSD) The OSD menu shows disc playback information (e.g., the title or chapter number, elapsed playing time or audio/ subtitle language).
Disc Operations Title/Chapter/Track selection (DVD/VCD) 1 Press 3 / 4 to select [TITLE] or [CHAPTER] (DVD) or [TRACK] (VCD). 2 Press ENTER/OK to confirm the selection. 3 Select a title, chapter or track number using the numeric buttons (0-9). Time search (DVD/VCD) 1 Press 3 / 4 to select [TT TIME] or [CH TIME] (DVD) or [TRACK TIME] or [DISC TIME] (VCD). • [TT TIME] refers to the total time of the current title, and [CH TIME] refers to the total time of the current chapter.
Disc Operations Changing the audio language and/or format • Press AUDIO repeatedly to select an audio language. Subtitles • Press SUBTITLE repeatedly to select a subtitle language. Audio CDs English Audio Playing by discs 1 Load a disc. ➜ Playback starts automatically. ➜ The TV screen displays the current playback status and the number of tracks to select the desired track. 2 Playback stops at the end of the disc. 3 To stop playback, press STOP (9).
Disc Operations During playback, you can: • Press S / T to select another track/file in the current folder. • Press PAUSE (;) to pause playback. Note: – It may not be possible to play certain MP3/ JPEG discs due to the configuration and characteristics of the discs or the recording conditions. Selecting a folder and track/file 1 Press 3 / 4 to select a folder, and then press ENTER/OK to open the folder. 2 Press 3 / 4 to select a track/file. 3 Press ENTER/OK to confirm your selection.
Disc Operations English Scan effect • Press ANGLE repeatedly to choose a scan effect. ➜ Various scan effects appear in the top left corner of the TV screen. Playing MP3 music and JPEG pictures simultaneously 1 Load a disc that contains both music and picture data. ➜ The disc menu appears on the TV screen. 2 Select an MP3 track. 3 During MP3 music playback, select a picture from the TV screen, and then press PLAY (B).
Setup Menu Setup is carried out on the TV screen, enabling you to customize this unit to suit your own particular requirements. General setup menu 1 Press SETUP. 2 Press 1 / 2 to select the “General Setup” icon. 3 Press ENTER/OK to confirm your selection. GENERAL SETUP PAGE DISC LOCK DISPLAY DIM PROGRAM OSD LANGUAGE SCREEN SAVER SLEEP Locking/Unlocking the disc for viewing Not all discs are rated or coded by the manufacturer of the disc. You can prevent playback of a specific disc by locking the disc.
Setup Menu PROGRAM: TRACK: (01-17) 1 2 3 4 5 6 __ 04 10 __ __ __ 7 8 9 10 EXIT __ __ __ __ START NEXT To input your favorite tracks/ chapters 3 Use the numeric buttons (0-9) to enter a valid track/chapter number. 4 Use 1 / 2/3 / 4 to move the cursor to the next position. • If you want to program more than ten tracks/chapters, press T to move to the next page, and then proceed with programming. OR • Use 1 / 2/3 / 4 to highlight [NEXT] on the program menu, and then press ENTER/OK.
Setup Menu To start program playback • Use 1 / 2/3 / 4 to highlight [START] on the program menu, and then press ENTER/OK. ➜ Playback starts for the selected tracks or discs in the programmed sequence. To exit from program playback • Use 1 / 2/3 / 4 to highlight [EXIT] on the program menu, and then press ENTER/OK. OSD language This menu contains various options for the on-screen display (OSD) language. For details, see “Setting the OSD language” on page 11.
Setup Menu Set the analog output to match the playback capability of this unit. 1 In “AUDIO SETUP PAGE”, press 3 / 4 to highlight [ANALOG OUTPUT], and then press 2. STEREO Select this to change the channel output to stereo, which only delivers sound from the two front speakers. LT/RT Select this if this unit is connected to a Dolby Pro Logic decoder. 2 Press 3 / 4 to select a setting, and then press ENTER/OK to confirm your selection.
Setup Menu CD upsampling Use this feature to convert your music CD to a higher sampling rate using sophisticated digital signal processing for better sound quality. If you activate the upsampling function, this unit automatically switches to the stereo mode. 1 In “AUDIO SETUP PAGE”, press 3 / 4 to highlight [CD UPSAMPLING], and then press 2. OFF Select this to disable CD-upsampling. 88.2kHz (X2) Select this to convert the sampling rate of CDs to twice that of the original. 176.
Setup Menu Set the aspect ratio of this unit to match your TV. The format you select must be available on the disc. Otherwise, the TV display setting will not affect the picture during playback. 1 In “VIDEO SETUP PAGE”, press 3 / 4 to highlight [TV DISPLAY], and then press 2. 2 Press 3 / 4 to highlight one of the following options. 4:3 PAN SCAN Select this if the aspect ratio of your TV is 4:3 and you want both sides of the picture to be trimmed or formatted to fit your TV screen.
Setup Menu Progressive This feature is only valid if you have connected this unit to a progressive scan TV through the component video jacks (see “Component video jacks ” on page 7). 1 In “VIDEO SETUP PAGE”, press 3 / 4 to highlight [PROGRESSIVE], and then press 2. ON Select this to enable the progressive scan function. OFF Select this to disable the progressive scan function. 2 Press 3 / 4 to select a setting, and then press ENTER/OK to confirm your selection.
Setup Menu PERSONAL PICTURE SETUP BRIGHTNESS CONTRAST TINT COLOR 0 0 0 0 4 Press 3 / 4 to select one of the following options. BRIGHTNESS Increase the value to brighten the picture or vice versa. Zero (0) is the average brightness setting value. CONTRAST Increase the value to sharpen the picture or vice versa. Zero (0) is the average contrast setting value. TINT Increase the value to darken the picture or vice versa. Zero (0) is the average tint setting value.
Setup Menu Audio, subtitle and disc menu These menus contain various language options for the audio, subtitles and disc menus recorded on the DVD. For details, see “Setting the audio, subtitle and disc menu languages” on page 11. Restricting playback with parental control Some DVDs may have a parental level assigned to the complete disc or to certain scenes on the disc. This feature lets you set a playback limitation level. The rating levels are from 1 to 8 and are country dependent.
Setup Menu Changing the password The same password is used for both Parental Control and Disc Lock. Enter your six-digit password when prompted on the screen. The default password is 000 000. 1 In “PREFERENCE PAGE”, press 3 / 4 to highlight [PASSWORD], and then press 2 to select [CHANGE]. English WITH MENU Select this to display only the folder menu of the MP3/Picture CD. WITHOUT MENU Select this to display all the files contained in the MP3/Picture CD.
Language Code These codes can be used to select other languages. This does not affect the options in “AUDIO”, “SUBTITLE” or “DISC MENU”.
Language Code Maori Marathi Marshallese Moldavian Mongolian Nauru Navaho, Navajo Navajo; Navaho Ndebele, North Ndebele, South Ndonga Nepali Northern Sami North Ndebele Norwegian Norwegian Bokmål; Bokmål, Norwegian Nynorsk; Nyanja; Chichewa; Chewa Nynorsk, Norwegian; Occitan (post 1500); Proven Old Bulgarian; Old Slavonic; Old Church Slavonic; Old Old Slavonic; Church Oriya Oromo Ossetian; Ossetic Ossetic; Ossetian Pali Panjabi Persian Polish Portuguese Provençal; Occitan (post) Pushto Quechua Raeto-Romance
Troubleshooting Refer to the chart below when this unit does not function properly. If the problem you are experiencing is not listed below or if the instruction below does not help, set this unit to the standby mode, disconnect the power cord, and contact the nearest authorized YAMAHA dealer or service center. Problem 32 En Solution No power – Check if the AC power cord is properly connected. – Press STANDBY/ON on the front panel of this unit to turn on the power.
Troubleshooting Solution No audio at digital output – Check the digital connections. – If you are playing a DTS source, check that your receiver can decode DTS and “DIGITAL OUTPUT” is set to “ALL” (see page 23). – If you are playing an MPEG-2 source, check that your receiver can decode MPEG-2. Otherwise, make sure “DIGITAL OUTPUT” is set to “PCM ONLY” (see page 23). – Check if the audio format of the selected audio language matches your receiver capabilities.
Glossary Analog: Sound that has not been turned into numbers. Analog sound varies, while digital sound has specific numerical values.These jacks send audio through two channels, the left and right. Aspect ratio: The ratio of vertical and horizontal sizes of a displayed image. The horizontal vs. vertical ratio of conventional TVs. is 4:3, and that of widescreens is 16:9. AUDIO OUT Jacks: Jacks on the back of this unit that send audio to another system (TV, Stereo, etc.).
Specifications TV STANDARD (PAL/50 Hz) (NTSC/60 Hz) DVD-Video Video CD & SVCD CD PICTURE CD CD-R, CD-RW DVD+R, DVD+RW DVD-R, DVD-RW Number of lines Playback 525 (PAL/NTSC) CONNECTIONS VIDEO PERFORMANCE Video (CVBS) output RGB (SCART) output Component video output 625 Multistandard 1 Vpp into 75 ohm 0.7 Vpp into 75 ohm Y: 1 Vpp into 75 ohm PB/CB PR/CR: 0.
00cv_DV-C6860_G.fm Page 1 Thursday, March 30, 2006 5:04 PM G DVD CHANGER LECTEUR DE DVD CHANGEUR DV-C6860 DV-C6860 OWNER’S MANUAL MODE D’EMPLOI BEDIENUNGSANLEITUNG 2006 YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A. YAMAHA CANADA MUSIC LTD. 135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA YAMAHA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR. 22-34, 25462 RELLINGEN BEI HAMBURG, GERMANY YAMAHA ELECTRONIQUE FRANCE S.A.