.YAMAHA DVD AUDIO/VIDEO SA-CD PLAYER LECTEUR DE DVD AUDIO/VIDEO SA-CD ·DVD-S2500 OWNER'S MANUAL MODE D'EMPLOI .YAMAHA e j NATU"AL SOUND DVD AUmCVV'O
IMPORTANT SAFETY INSTRUCTIONS 12 Grounding or Polarization - CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. Explanation of Graphical Symbols 2 This product may be equipped with a polarized alternating current line plug (a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature.
FCC INFORMATION (for US customers) I. IMPORTANT NOTICE: DO NOT MODIFY THIS UNITl This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications not expressly approved by Yamaha may void your authority, granted by the FCC, to use the product. 2. IMPORTANT: When connecting this product to accessories and/or another product use only high quality shielded cables. Cable/s supplied with this product MUST be used.
CAUTION: READ THIS BEFORE OPERATING YOUR UNIT 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 iii To assure the finest performance, please read this manual carefully. Keep it in a safe place for future reference. Install this sound system in a well ventilated, cool, dry, clean place - away from direct sunlight, heat sources, vibration, dust, moisture, or cold. In a cabinet, allow about 2.5cm (l inch) of free space all around this unit for adequate ventilation.
, Table of Contents Patent information Playable disc formats Region management information Supplied accessories Installing batteries in the remote control Using the remote control. Maintenance 2 2 3 3 3 4 4 Front panel Rear panel Remote control connectors and RS-232C terminal Remote control 5 6 6 7 Audio connection Digital audio connections i.
Introduction Thank you for purchasing the YAMAHA DVD AUDIONIDEO SA-CD player. This Owner's Manual explains its basic operations. [][] IDOLBY I DIGITAL '4;"""9 1+ .• Manufactured under license from Dolby Laboratories. "Dolby", "Pro Logic", and the double-D symbol are trademarks of Dolby Laboratories. Iftf!' "DTS" and "DTS Digital Surround" are registered trademarks of Digital Theater Systems, Inc. IDCDfMI "DCDi" is a trademark of Faroudja, a division of Genesis Microchip, Inc.
Introduction The unit is designed to support the Region Management System. Check the regional code number on the disc package. If the number does not match the unit's region number (see table below, or see back of unit), the unit may be unable to play the disc. Model Region number of the unit Insert the batteries in the correct direction by aligning the "+" and "-" marks on the batteries with the polarity markings "+" and "-" inside the battery compartment. Discs that can be played (Example) U.S.A.
Introduction L.-.-II....... .... 0 0 0 000 Point the remote control at the sensor, within approximately 6 m (20 feet) of the unit. Handling the remote control Do not spill water or other liquids on the remote control. Do not drop the remote control.
Functional Overview o tray - stops DlaVb(lcK DD to the previous chapter or track to the next chapter or track DVD-AUDIO indicator -lights up when the unit detects DVD-Audio signals SA-CD indicator -lights up when the unit detects SA-CD signals MULTI CH indicator -lights up when you play multi-channel audio source HDMI indicator -lights up when the unit is capable of outputting signals from the HDMI (High Definition Multimedia Interface) terminal LLINK indicator -lights up when an AV receiver selects i.
Functional Overview output terminal -C{lnnlp.(~r to the HDMI jack on a LU1VII--COmtlatlble AV component MODE switch the component video output between progressive and - s 'WlLCnt~S RS-232C terminal - use as an expansion terminal for commercial use Consult your dealer for details REMOTE CONTROL connectors - use in custom installations to transmit remote control signals via cable connections i.LINK connectors - connect to the i.LINK jack on an i.
Functional Overview DIMMER -adjusts the display brightness AUDIO DIRECT - switches video output on and off during audio disc playback (91 I - turns the power of this unit ON or enters standby mode SOUND MODE - selects the required sound mode • for SA-CD: CD, Stereo, or Multichannel (if available) • for DVDNCD: Stereo, Dolby Surround compatible, 3D sound, or Multi-channel 0-9 numeric buttons SUBTITLE - selects subtitle languages PAGE -turns pages of the DVD-Audio still pictures AUDIO - selects audio la
Preparation • There are various ways to connect the player, depending on the equipment you wish to use. The following drawings illustrate some possible configurations. Please refer to manuals for other equipment as necessary to ensure that you make the correct connections. Do not connect the player via your VCR. The video quality could be distorted by the copy protection system. Do not connect the player's audio output jack to the phono input jack on your audio system. i.
Preparation Analog audio (MIXED 2CH) connection Use the audio cable supplied with the player to connect AUDIO OUT L (left) and R (right) jacks of the player to the corresponding input jacks on your audio equipment, such as an AV receiver. If your AV receiver features video output jacks, connect this unit to the AV receiver (and then to your TV). This enables you to use one TV for several different video sources (LD, VCR etc.) by simply switching the input source selector on your AV receiver.
Preparation SCAN MODE selector This selector switches the type of output signal from the COMPONENT video jacks on this unit. INTERLACE: 1 2 3 Connect the AC power cord to the power outlet. Switch on the TV and this unit. Set the TV to the correct Video IN channel. (e.g. EXTl, EXT2, AVl, AV2, AUDIONIDEO, etc. Refer to your TV owner's manual for detail.) ... The front panel display lights up and the default screen appears on the TV. 4 If you are using an external equipment (e.g.
Preparation G)Menu Language (see page 17) @Analog output (see page 16) You can select the language displayed in the On-screen menu. 1 Go to [Menu Language] (Setup -+ Language -+ Menu Language) by using /1 V <::::] t:> buttons on the remote control, then press t:>. .. Choices are displayed on the right column. 2 Select a language to be displayed in the On-screen menu by using /1 V buttons. 3 Press <::::] to return to the previous menu.
On-screen menu The On-screen menu enables you to customize this unit to suit your requirements. Adv.Picture Allows you to fine-tune the following video parameters. Press ON SCREEN on the remote control. ... The On-screen menu appears on the screen. • Program 4 Preferences • Toolbar • Setup • View ..j • Play Option • Search • Slide Show e3 Toolbar 2 Press!1 V -<::J I> to navigate the On-screen menu and to change the settings. 3 Press ON SCREEN to exit from the On-screen menu.
On-screen menu HDMI Video Enables you to adjust the resolution depending on the monitor you are using. You can use this function only when the HDMI output terminal is connected to a HDMI-compatible component. Choices: 480p, 576p, 720p, 1080i, Auto Initial setting: 480p Setting Examples 480p 576p Select the desired resolution for the 7-2-0p- - - - 1 monitor you are using. *1 1----- 1080i Auto 16:9 (Projector) The resolution is automatically selected to match the monitor you are using.
On-screen menu Night mode When set to [On], the dynamics of the sound output is optimized. High volume output is softened, enabling you to watch your favorite action movie without disturbing others. Choices: On, Off Initial setting: Off Angle Some DVD discs feature a multiple angle function, enabling you to watch certain scenes from various angles. Function availability and the number of camera angles vary according to the disc. Page Turns pages of DVD-Audio still images.
On-screen menu Slide Show TV Use this feature for JPEG slide show playback. TV shape If you connect to a conventional 4:3 aspect TV, select [4:3 panscan] (the left and right sides are trimmed when you play 16:9 video) or [4:3 letterbox] (black areas appear at the top and bottom when you play 16:9 video). Select [Widescreen] if you connect to a Wide-Screen TV. Choices: 4:3 panscan, 4:3 letterbox, Widescreen Initial setting: 4:3 panscan Picture time Sets the duration for each image.
On-screen menu Audio Menu Digital output Enables you to specify the type of digital output that best suits your AV receiver or HDMI monitor/receiver. Select [PCM only] if your receiver or HDMI monitor/ receiver is not capable of decoding multi-channel audio. Select [All] if you connected this unit's digital out jacks to a multi-channel decoder/receiver. Choices: Off, PCM only, All Initial setting: All Note: - SA-CD audio signal is not output from DIGITAL OUTjacks.
On-screen menu Language Enables you to select a language for audio, subtitles, On-screen menus or DVD menus. The selected languages will be used for all discs, untilyou modify your settings. If the selected language is not available on the disc, the default language designated by the disc will be applied. Default sub-title Selects a default subtitle language. This setting also applies to DVD menu items. Menu Language Selects a language for the On-screen display.
On-screen menu Surround Size Specifies the surround speaker size. Choices: Large, Small, Off Initial setting: Large Slope Filter slope adjustment for a subwoofer. Choices: 12, 18, 24 (dB/oct) Initial setting: 12 (dB/oct) Subwoofer If you wish to use a subwoofer, select [On]. Otherwise select [Off]. Choices: On, Off Initial setting: On Front R Vol Choices: -6 to +6 Initial setting: 0 Note: - You may not be able to make settings that match your speaker layout.
On-screen menu Connection Status This screen shows components connected using the i.LINK interface, and the transfer capabilities of each component with respect to Dolby Digital, DTS and MPEG audio formats. Choices: Component 1, Component 2, ... Initial setting: Component 1 AutoPlay Select You can use this setting to specify a receiver for automatically switching the input to this player when you start playback of a disc. Choices: Off, Component 1, Component 2, ...
Operation Notes: - Unless otherwise stated, all operations described herein are based on remote control usage. - Some operations can be carried out using the Onscreen menu on the TV screen. 1 Press STANDBY/ON <.!>I I to tum on the unit. 2 Press OPEN/CLOSE ~ on the front panel to open the disc tray. 3 Place the disc in the tray, with the label facing up. 4 Press OPEN/CLOSE ~ again to close the tray. -. READING appears in the Status window on TV and on the player's front panel display, and playback starts.
Operation The DVD-Audio is developed for the sole purpose of creating high quality pure sound with Linear PCM and Packed PCM (Loss less coding) in up to six audiochannels. The sampling frequency of 192 kHz/24 bits are supported. Moreover, many DVD-Audio discs offer slide show and page tum capabilities. Menu DVDs may contain menus to navigate the disc and access special features such as audio language selection, subtitle language selection, and other options. 1 Press MENU. ...
Operation The SA-CD standard is based on Direct Stream Digital (DSD) technology. This new direct-stream digital format comprises a I-bit system that has a digital sampling frequency that is 64 times higher than that of conventional audio CD. There are three types of SA-CD discs: single-layer, dual-layer and hybrid discs. Each type may contain two areas of recorded information: a High Quality Stereo area and a High Quality Multi-channel area. - A single layer disc can contain both information areas.
Operation The following VCD and SVCD features and formats are supported: Audio CDs contain only TRACKS. They can be played on this unit with the audio output connected to a stereo system or to your TV. Select tracks using the track list on the TV screen or by pressing the numerical buttons or 6. V buttons. Disc structure ~lTRACK1 TRACK 2 TRACK 3 Playing a disc Features Video CDs 2.0 Super Video CDs 1.0 Video bit rate resolution NTSC resolution PAL MPEG-l constant 1,150 Kbps 352x240, 29.
Operation You can play MP3 music that was recorded onto a CD-R or CD-RW by a computer. Disc structure (example) ~ Album 1 (Folder) t Track 1 (File) Track 2 Album 1.1 ~Track 1 Album 2 Since the MP3 format can store several albums onto a disc, a folder is assigned to an "Album", and a file is assigned to a "Track". Additional note for MP3 disc playback: - The disc read time may exceed 10 seconds due to the large number of songs compiled onto one disc. - Multi-session· discs are supported.
Operation • • This player can playback JPEG format pictures on a personally recorded CD- RJRW disc or commercial CD. 1 Press MENU to return to the thumbnail screen. When you press PAUSE, the slide show pauses. To return to the normal slide show, press PLAY. Repeat and shuffle function are also available for JPEG discs. Disc structure Roll 1 Roll 21 Image 1 Image 2 Image 3 You can set the duration of each image.
Operation 3 4 Moving to another segment
Operation Shuffle Repeat Press REPEAT button to repeat a certain segment of the disc. Each time you press REPEAT, the repeat mode changes as follows: • •• • •• Track Chapter Group Title Disc Disc O ff O ff ~~~ This function shuffles the playing order of chapters or tracks within a title/group/album (if the title/group/ album has more than one chapter or track). When Shuffle Play within a title/group/album finishes, the unit continues shuffle playback within the next title/group/ album.
Operation, FTS video/audio program Erasing all tracks/chapters/i ndexes from the FTS list c:!P~~~~~ • • • The FTS (Favorite Track Selection) function enables you to store your favorite tracks, etc. The FTS list can contain up to 20 items. The most recent program list is placed on the top of the existing list. 1 Press ON SCREEN on the remote control. -+ The On-screen menu appears. 2 Go to [Tracks] (Toolbar ~ Program ~ Tracks) by using the 11 V buttons, then press the t::> button.
~Operation Notes: - The player memory can maintain 120 authorized (Disc locked) disc titles. A disc title will be added to the list if [Play always] is selected. Each time a Disc locked disc is played, it will be added to the top ofthe list. When the list is full (120), the last disc in the list will be replaced when a new disc is added. Double-sided DVDs and multi-volume VCDs may have a different ID for each side. In order to make Disc Locks to such discs, each side must be authorized.
Troubleshooting WARNING Under no circumstances should you try to repair the system yourself, as this will invalidate the warranty. Do not open the system as there is a risk of electric shock. If a fault occurs, first check the points listed below before taking the system in for repair. Problem Solution No power - Check to ensure that the AC power cord is properly connected. No picture - Check to ensure that the TV is switched on. - Check the video connection.
Specifications PLAYBACK SYSTEM AUDIO PERFORMANCE (Without upsampling) DVD-Audio DVD-Video Super Audio-CD, Stereo/Multi-channel and Hybrid disc DVD+R, DVD+RW DVD-R, DVD-RW (Video Format) Video CD (VCD) Super Video CD (SVCD) CD-Audio (CD-DA) CD-RlCD-RW (CD-DA, VCD, SVCD) MP3, JPEG DA Converter DVD CDNideoCD Signal-Noise Ratio Dynamic Range 24 bits fs 96 kHz fs 44.1 kHz Total Harmonic Distortion (l kHz) 2 Hz - 44 kHz 2 Hz - 20 kHz 115 dB 103 dB (DVD 48 kHz 24 bit) 0.
.YAMAHA © 2005 YAMAHA YAMAHA YAMAHA YAMAHA YAMAHA YAMAHA YAMAHA YAMAHA CORPORATION ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE" BUENA PARK, CALIF. 90620, U.S.A. CANADA MUSIC LTD. 135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR. 22-34, 25462 RELLINGEN BEl HAMBURG, GERMANY ELECTRONIQUE FRANCE S.A. RUE AMBROISE CROIZAT BP70 CROISSY·BEAUBOURG 77312 MARNE-LA-VALLEE CEDEX02, FRANCE ELECTRONICS (UK) LTD.
.YAMAHA DVD-S2500 Additional Inforillation English A disc in the disc tray may be scratched in the following cases: - If you unplug the power cable from the AC wall outlet when this unit is turned on. - If you cut off the external power supply to this unit connected to the AC switched outlet of your receiver. To prevent scratches, be sure to remove the disc from the disc tray before you unplug the power cable or before you cut off the external power supply to this unit.
·YAMAHA Registering Your New Yamaha Product is Fast and Easy Thank you for purchasing a new product from Yamaha Electronics.We'd like to continue providing you with high quality· products and better service. So, we've made it simple to register your new product purchase online. Please take a few minutes to visit our website at www.yamaha.comIYEC/registration/ and complete the information and questions included there.We appreciate your business and we look forward to hearing from you.
.YAMAHA HOME AUDIO PRODUCTS LIMITED WARRANTY II FOR USA CUSTOMERS ONLY II SERVICE DEPARTMENT YAMAHA Electronics Corporation, USA 6660 Orangethorpe Avenue, Buena Park, California 90620-1345 Telephone: (714) 522-9105 Internet URL : http://www.yamaha.com/yec/ To obtain warranty service for your YAMAHA DVD player or changer, please dial (800) 292-2982 or please visit us at http://www.yamaha.com/yec/customer/dvdexchange.htm.