GB DVD / VIDEO CD / CD PLAYER LECTEUR DE DVD DVD-S520 OWNER’S MANUAL MODE D’EMPLOI BEDIENUNGSANLEITUNG BRUKSANVISNING MANUALE DI ISTRUZIONI MANUAL DE INSTRUCCIONES GEBRUIKSAANWIJZING PLAY NATURAL SOUND DVD PLAYER STANDBY POWER TruSurround OPEN CLOSE by SRS DVD / VIDEO CD / CD PAUSE STOP
Important Note DK SF Advarsel: Laserrudstråling ved åbning når sikkerhesafbrydere er ude af funktion. Undgå u tsættelse for stråling. Luokan 1 laserlaite + Klass 1 laserapparat Varoitus! Laitteen käyttäminen muulla kuin tässä käyttöohjeessa mainitulla tavalla saattaa altistaa käyttäjän turvallisuusluokan 1 ylittävälle lasersäleilille. Bemærk: Netafbryderen POWER er sekundært indkoblet og afbryder ikke strømmen fra nette.
General information CAUTION Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. ATTENTION L’emploi de commandes, de réglages ou un choix de procédures différents des spécifications de cette brochure peut entraîner une exposition à d’éventuelles radiations pouvant être dangereses.
CAUTION: READ THIS BEFORE OPERATING YOUR UNIT. 1 To assure the finest performance, please read this manual carefully. Keep it in a safe place for future reference. 2 Install this unit in a well ventilated, cool, dry, and clean place with at least 2.5 cm (1 inch) above, behind and on the both sides of this unit - away from direct sunlight, heat sources, vibration, dust, moisture, and/or cold.
Contents Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories. ”DTS” and ”DTS Digital Surround” are trademarks of Digital Theater Systems, Inc.
Introduction DVD Video Introduction Unpacking Your DVD Video player will playback digital video discs conforming to the universal DVD Video standard. The unique features of DVD Video, such as selection of sound track, subtitle languages and different camera angles (disc dependent), are all supported. In addition to DVD Video discs, you will be able to playback all Video CDs, SVCDs and Audio CDs. First check and identify the contents of your DVD Video player package. You should have the following items.
Functional Overview English Front and Rear Panels R/T – search forward* / go to the next chapter or track POWER – switches the player to Standby mode or On B PLAY – star ts playback STANDBY indicator – lights red when the player is in Stand-by mode S/Q – search backward* / go to a previous chapter or track DISPLAY – shows the current status of the player PLAY NATURAL SOUND DVD PLAYER STANDBY POWER TruSurround OPEN CLOSE by SRS PAUSE STOP DVD / VIDEO CD / CD Disc Tray / OPEN/CLOSE – opens/cl
Remote Control POWER (B/ | ) – switches DVD ON or to standby-on mode RETURN / RESUME – go back to previous menu / to continue playback after play was stopped MENU – access menu of a DVD disc 1 2 3 4 cursor buttons – (left/right/up/down) select an item in the menu POWER 1 2 3 4 5 6 7 8 9 RETURN/RESUME BIT RATE MENU ON SCREEN ENTER/OK – acknowledge menu selection STOP PLAY BIT RATE – display bit rate indicator during playback ON SCREEN – access or remove the player’s menu ENTER OK S – s
Preparation ¶ ¶ ¶ Analog Connections Depending on the equipment you wish to connect, there are various ways you could connect the player. Possible connections are shown in the following drawings. Please refer to the manuals of other equipment as necessary to make the best connections. Do not connect the player via your VCR. The video quality could be distorted by the copy protection system. Do not connect the player’s audio out jack to the phono in jack of your audio system.
S-Video terminal NTSC/PAL Conversion S (separate) video connection achieves a clearer picture than composite video connection by separating color and luminance when transmitting signals. Use commercially available S-video cable. Receiver (and TV) with S-video input is required. This player is equipped with a NTSC/PAL conversion feature to convert the video output of the disc to match your TV system.
General In ‘Initial Setup’ you may have to set your preferences for some of the player’s features. (not applicable for all models) Operation After switching on the player for the very first time, the ‘Initial Setup Screen’ will appear. The menu for the first item to be set is displayed and the first option is highlighted. ¶ ¶ Use the 4 3 to go through the options in the menu. The icon of the selected option will be highlighted. Use ENTER/OK to confirm your selection and to go to the next menu.
Temporary Feedback Field Icons Picture – TV Shape See ‘Initial Setup’ Scan Repeat All Repeat Title – Black level shift (NTSC only) Select On for adapting the colour dynamics to obtain richer contrasts. Repeat Track 1en Repeat Chapter 1en 1 2 TV shape Shuffle Black Level Shift On Video Shift Off Shuffle Repeat Repeat A to end – Repeat A-B The factory centres the video on your screen.
Language – Select the required Menu, Audio and Subtitle language. See ‘Initial Setup’. Audio language and Subtitle language can also be adapted via the Menu bar on the screen. Digital output Factory setting: ALL. This means digital output is on. If you are not connecting to equipment with a digital input, change the setting to Off. If your equipment doesn't include a digital multi-channel decoder, set the digital output to PCM only (Pulse Code Modulation).
Operation Loading Discs General Features Note: – Unless stated, all operations described are based on remote control operation. A number of operations can also be carried out via the menu bar on the screen. 1 Press / on the front of the player to open disc tray. 2 Load your chosen disc in the tray, label side up. 3 Press / again, to close the tray. ➜ reading appears in the status window and READING on the player display, and playback starts automatically.
¶ ¶ Time search Select (Scan Speed) in the menu bar. Use 4 to enter the FAST MOTION menu. Use 1 2 to select the required speed: -32, -8 or -4 (backward), or +4, +8, +32 (forward). Select 1 or press B to play the disc at normal speed again. To exit FAST MOTION mode, press 3. (Playback continues at the selected speed.) ENTER OK STOP ¶ ¶ ¶ PLAY PAUSE SUBTITLE ANGLE ZOOM AUDIO ¶ ¶ ¶ To search forward or backward through different speeds, you can also hold down S or T.
¶ ¶ FTS-Video Special DVD Features The FTS-Video function allows you to store your favourite titles and chapters (DVD) and favourite tracks and indexes (VCD) for a particular disc in the player memory. FTS program can contain 20 items (titles, chapters etc.). Checking the contents of DVD Video discs: Menus DVDs may contain menus to navigate the disc and access special features. To use the menu, press the appropriate numerical key; or use the 4, 3, 2, 1 to highlight your selection, then press ENTER/OK.
¶ Playback Control (PBC) ¶ ¶ ¶ ¶ ¶ Moving to another track Load a Video CD with PBC and press B. Go through the menu with the keys indicated on the TV screen until your chosen passage starts to playback. If a PBC menu consists of a list of titles, you can select a title directly. Enter your choice with the numerical keys (0-9). Press RETURN/RESUME to go back to the previous menu. You may also select PBC OFF under Personal Preferences.
Audio Disk Mode Stop FTS Track Time Total tracks Total time –– –.––.–– 15 1.17.02 On Off Track Program 1 2 3 4 5 6 7 8 ¶ ¶ ¶ ¶ > Following formats can’t be supported The files like *.WMA, *AAC, *.DLF, *.M3U, *.PLS Chinese filename The non-session closed discs The discs recorded under UDF format Downloading MP3 files from the Internet or copying songs from your own legal discs is a delicate process.
Access Control 1 2 3 When changing Access control settings, first decide your PIN number. You need to enter the number whenever your change the settings. Select ACCESS CONTROL in the features menu using 3/4, and then press 2. Enter your 4-digit code of your own choice. Enter the code a second time.
Activating/Deactivating Parental Control 1 When disc playback is stopped, select ACCESS 2 3 4 5 CONTROL in the features menu using 3/4, and then press 2. Enter your 4-digit code. If necessary, enter the code a second time. Move to Parental Control using 3/4. Move to VALUE ADJUSTMENT (0-8) using 2. Then use the 3/4 or the numerical keys on the remote control to select a rating from 0 to 8 for the disc inserted. 2 3 4 5 6 CONTROL in the features menu using 3/4, and then press 2. Enter the old code.
Troubleshooting English If it appears that the DVD Video player is faulty, first consult this checklist. It may be that something has been overlooked. Under no circumstances attempt to repair the system yourself. Look for the specific symptom(s). Then perform only the actions listed to remedy the specific symptom(s). Symptom Remedy No power – Make sure the power cord is properly connected. – Check if there is power at the AC outlet by plugging in another appliance.
Specification PLAYBACK SYSTEM DVD Video Video CD & SVCD CD (CD-R and CD-RW) DVD+RW MP3 CONNECTIONS SCART S-Video Output Video Output Audio L+R output Subwoofer output Digital Output OPTICAL READOUT SYSTEM Lasertype Semiconductor AlGaAs Numerical Aperture 0.60 (DVD) 0.
YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A. YAMAHA CANADA MUSIC LTD. 135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA YAMAHA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR. 22-34, 25462 RELLINGEN BEI HAMBURG, F.R. OF GERMANY YAMAHA ELECTRONIQUE FRANCE S.A. RUE AMBROISE CROIZAT BP70 CROISSY-BEAUBOURG 77312 MARNE-LA-VALLEE CEDEX02, FRANCE YAMAHA ELECTRONICS (UK) LTD. YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD1 7JS, ENGLAND YAMAHA SCANDINAVIA A.B.