UA DVD AUDIO/VIDEO SA-CD PLAYER LECTEUR DE DVD AUDIO/VIDEO SA-CD DVD-S657 OWNER’S MANUAL MODE D’EMPLOI ©2005 YAMAHA YAMAHA YAMAHA YAMAHA YAMAHA YAMAHA YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A. CANADA MUSIC LTD. 135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR. 22-34, 25462 RELLINGEN BEI HAMBURG, GERMANY ELECTRONIQUE FRANCE S.A.
IMPORTANT SAFETY INSTRUCTIONS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
FCC INFORMATION (for US customers) 1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT! This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications not expressly approved by Yamaha may void your authority, granted by the FCC, to use the product. 2. IMPORTANT: When connecting this product to accessories and/or another product use only high quality shielded cables. Cable/s supplied with this product MUST be used. Follow all installation instructions.
CAUTION: READ THIS BEFORE OPERATING YOUR UNIT. 1 2 3 4 5 6 7 8 9 10 11 12 13 iii To assure the finest performance, please read this manual carefully. Keep it in a safe place for future reference. Install this sound system in a well ventilated, cool, dry, clean place — away from direct sunlight, heat sources, vibration, dust, moisture, or cold. In a cabinet, allow about 2.5cm (1 inch) of free space all around this unit for adequate ventilation.
Contents Disc Operations Region Codes..............................................................3 Supplied accessories ..................................................3 Notes about discs ......................................................3 Cleaning discs..............................................................3 Patent information .....................................................3 Basic Playback........................................................... 14 General Operation................
Contents Setup Menu General Setup Menu............................................... 23 Selecting DVD-Audio/Video mode ........................23 Locking/Unlocking the disc for viewing.................23 Dimming player’s front panel display .....................23 Programming disc tracks (not for Picture CD/MP3)................................................................................24 OSD Language....................................................................24 Screen Saver....................
02_EN_body_DVD-S657_UA.fm Page 3 Thursday, April 14, 2005 8:39 PM Introduction Region Codes DVD discs must be labeled for ALL regions, Region 1 (U.S.A model) or Region 4 (Australia model) in order to play on this Player. You cannot play Discs that are labeled for other regions. ALL 1 4 Supplied accessories – Remote control – Batteries (two AA size) for remote control – Audio pin cable – Video pin cable – Owner’s Manual – Be sure to use only CD-R and CD-RW discs made by reliable manufacturers.
Functional Overview Front Panel 9 STOP – stops playback STANDBY/ON – turns on this unit or sets it to the standby mode ; PAUSE – pauses playback B PLAY – starts playback Disc tray DVD-AUDIO indicator – lights up when the player detects DVD-Audio signals SA-CD indicator – lights up when the player detects SA-CD signals PROGRESSIVE indicator – lights up when the unit enters Progressive mode / OPEN/CLOSE – opens or closes the disc tray Front panel display – shows information about the operational status
Functional Overview AC Power Cord – connects to a standard AC outlet COAXIAL digital audio output – connects to a digital (coaxial) input of your AV receiver or stereo system S VIDEO output – connects to an S-Video input on your AV receiver OPTICAL digital audio output – connects to a digital (optical) input on your AV receiver or stereo system English Rear Panel COMPONENT video outputs – connect to an AV receiver with Y PB/CB PR/CR inputs VIDEO output (composite video out) – connects to a video inp
Functional Overview Remote Control AUDIO DIRECT – switches video output on and off during audio disc playback B/ | – turns on this player or sets it to the standby mode PAGE – turns the pages of DVD-Audio still pictures numeric buttons – selects numbered items in the currently displayed menu DIMMER – use to select from 3 different brightness levels for the display ON SCREEN – accesses or clears the player’s On Screen Display menu SOUND MODE – selects a sound mode: Stereo, Virtual Surround or Multi-cha
Preparation Never make or change connections with the power switched on. • Depending on the equipment you wish to connect, there are various ways you could connect this unit. Possible connections are shown in the following drawings. • Please refer to the manuals of other equipment as necessary to make the best connections. • Do not connect this unit via your VCR. The video quality could be distorted by the copy protection system.
Preparation MIXED 2CH jacks Analog Connections This player has two types of analog output jacks. 6ch discrete jacks To reproduce multi-channel Super Audio CD and DVD-Audio, connect these jacks to your AV receiver’s multi channel input jacks using commercially available audio pin cables. Use the audio/video cable supplied with this player to connect the L (left) and R (right) jacks to the corresponding input jacks of your audio component, such as a stereo amplifier.
Preparation If your AV receiver has video output jacks, connect your receiver (and then to your TV) so that you can use one TV for several different video sources (LD, VCR, etc.) by simply switching the input source selector of your receiver. The player has three types of video output jacks. Use one of them in accordance with the input jacks of the equipment to be connected.
Getting Started Step1: Inserting batteries into the Remote Control 3 1 2 1 Open the battery compartment. 2 Insert the supplied two batteries type R06 or AA, following the indications (+ –) inside the compartment. 3 Close the cover. Using the remote control Remote control sensor Point the remote control at the sensor, within approximately 6 m (20 feet) of the unit. 30° Step2: Turning on the power 1 Connect the AC power cord to the power outlet. 2 Turn on the TV and your AV receiver.
Getting Started Notes: – Before changing the current TV Standard setting, ensure that your TV supports the ‘selected TV Type’ system. – If there is not a proper picture on your TV, wait for 15 seconds for auto recover. CHANGING NTSC TO PAL 1. ENSURE THAT YOUR TV SYSTEM SUPPORTS PAL STANDARD. 2. IF THERE IS A DISTORTED PICTURE DISPLAYED ON THE TV, WAIT 15 SECONDS FOR AUTO RECOVER. OK TIPS: Cancel Step4: Setting language preference You can select your own preferred language settings.
Getting Started Setting the Audio, Subtitle and Disc menu language PREFERENCE PAGE AUDIO SUBTITLE DISC MENU PARENTAL PBC MP3/JPEG NAV VR LIST PASSWORD ENGLISH CHINESE (SIMP) JAPANESE FRENCH SPANISH PORTUGUESE POLISH ITALIAN 1 Press STOP ( 9 ) twice, then press SETUP. 2 Press 2 repeatedly to select [PREFERENCE PAGE]. 3 Press 34 to highlight one of the options below at a time, then press 2.
Getting Started [SUBWOOFER] ON Select when a subwoofer is connected. OFF Select when no subwoofer is connected. [SPEAKERS VOLUME] Volume level setting for individual speakers (–6 dB ~ +6 dB). [SPEAKERS DELAY] Delay time settings in relation to the listening position/distance for center and surround speakers (0 MS~15 MS). SPEAKERS DELAY SETUP CENTER 0 MS SURROUND L SURROUND R 0 MS 0 MS 6 Press 1 2 to adjust the setting that best suits your surround sound needs. 7 Press ENTER/OK to confirm.
Disc Operations IMPORTANT! – If the inhibit icon ( or X) appears on the TV screen when a button is pressed, it means the function is not available on the current disc or at the current time. – Depending on the DVD or VIDEO CD, some operations may be different or restricted. – Do not push on the disc tray or put any objects other than disc on the disc tray. Doing so may cause the disc player malfunction. Basic Playback 1 Press STANDBY/ON on the front panel to turn on the DVD player.
Disc Operations Repeat • While playing a disc, press REPEAT continuously to choose a ‘Play Mode’. DVD-V/DVD-A ➔ RPT ONE (repeat chapter) ➔ RPT TT (repeat title) ➔ RPT OFF (repeat off) VCD/SVCD/CD ➔ RPT ONE (repeat track) ➔ RPT ALL (repeat disc) ➔ RPT OFF (repeat off) Shuffle This function shuffles the playing order of chapters or tracks within a title/group/ album (if the title/group/album has more than one chapter or track) in random order. 1 Press SHUFFLE during playback.
Disc Operations Zooming in This function allows you to enlarge the picture on the TV screen and to pan through the enlarged picture. 1 During playback, press ZOOM repeatedly to display the picture with different scales. ➜ Use 1 234 to pan through the enlarged picture. ➜ Playback will continue. 2 Press ZOOM repeatedly to return to the original size. Resuming playback from the last stopped point Resume playback of the last 10 discs is possible, even if the disc was ejected or the power switched off.
Disc Operations 2 Press ENTER/OK. 3 Enter hours, minutes and seconds from left to right using the numeric buttons. (e.g. 0:34:27) Audio/Subtitle/Angle (DVD discs) You can change [AUDIO], [SUBTITLE] or [ANGLE] if it is available on the disc you are playing. 1 Press 34 to select [AUDIO], [SUBTITLE] or [ANGLE]. 2 Press ENTER/OK. 3 For Audio and Subtitle, Press 34 to highlight your selection and press ENTER/OK. OR For Angle, Select an angle using the numeric buttons.
Disc Operations Special VCD & SVCD Features Playback Control (PBC) For VCD with Playback Control (PBC) feature (version 2.0 only) • Press MENU to toggle between ‘PBC ON’ and ‘PBC OFF’. ➜ If you select ‘PBC ON’, the disc menu (if available) will appear on the TV. ➜ Use the S / T or the numeric buttons to select a play option. • During playback, pressing TOP MENU/RETURN will return to the menu screen (if PBC is on).
Disc Operations DVD-Audio has developed for the sole purpose of creating high quality pure sound with Linear PCM and Packed PCM (lossless coding) in up to six audiochannels. Sampling frequencies of 192 kHz/ 24 bits are supported. Moreover, many DVD-Audio discs offer slide show and page turn capabilities. • When you play a down mix prohibited disc, D.MIX indicator turns off. Multichannel tracks will play regardless of the analog output settings in Setup Menu.
Disc Operations Playing a disc SA-CD (Super Audio CD) The SA-CD standard is based on Direct Stream Digital (DSD) technology. This new direct-stream digital format comprises a 1-bit system that has a digital sampling frequency 64 times higher than that of conventional audio CD. There are three types of SA-CD discs: single layer, dual layer and hybrid. Each type contains a High Density (HD) layer that has two separate data areas: a High Quality Stereo area and a High Quality Multi-channel area.
Disc Operations General Operation 1 Load a disc. ➜ The disc reading time may exceed 30 seconds due to the complexity of the directory/file configuration. ➜ The data disc menu appears on the TV screen. 2 Playback will start automatically, if not press PLAY ( B ). 00:00 00:00 001/020 Favorite MP3 Piano MP3 Cello MP3 Jazz MP3 Live Selecting a folder and track/file 1 Press 34 to select the folder and press ENTER/OK to open the folder. 2 Press 34 to select a track/file. 3 Press ENTER/OK to confirm.
Disc Operations Special picture disc features 1 Load a Picture disc (Kodak Picture CD, JPEG). ➜ For Kodak disc, the slide show will begin. ➜ For JPEG disc, the picture menu appears on the TV screen. 2 Press PLAY ( B ) to start the slide-show playback. Preview Function (JPEG) This function shows the content of the current folder or the whole disc. 1 Press STOP ( 9 ) during playback. ➜ 12 thumbnail pictures will appear on the TV screen.
Setup Menu General Setup Menu 1 Press SETUP. 2 Press 1 2 to select ‘General Setup’ icon. 3 Press ENTER/OK to confirm. GENERAL SETUP PAGE DVD-AUDIO DISC LOCK DISPLAY DIM PROGRAM OSD LANGUAGE SCREEN SAVER SLEEP DIVX(R) VOD CODE Selecting DVD-Audio/Video mode 1 In ‘GENERAL SETUP PAGE’, press 34 to highlight [DVD-AUDIO], then press 2. DVD-AUDIO MODE Select this for normal playback. DVD-VIDEO MODE Select this to playback the contents of the DVD-Video.
Setup Menu Programming disc tracks (not for Picture CD/MP3) You can play the contents of the disc in the order you want by programming the tracks to be played. Up to 20 tracks can be stored. 1 In ‘GENERAL SETUP PAGE’, press 34 to highlight [PROGRAM], then press 2 to select [INPUT MENU]. 2 Press ENTER/OK to confirm. To input your favorite tracks/chapter 3 Use the numeric buttons to enter a valid track/chapter number.
Setup Menu This feature automatically sets the DVD player in standby mode after the amount of time you have set. 1 In ‘GENERAL SETUP PAGE’, press 34 to highlight [SLEEP], then press 2. 2 Press 34 to select a setting. ➜ You can select from 15, 30, 45 and 60 minutes. Select [OFF] to cancel the sleep timer function. 3 Press ENTER/OK to confirm your selection. Audio Setup Menu English Sleep Timer 1 Press SETUP. 2 Press 1 2 to select ‘Audio Setup’ icon. 3 Press ENTER/OK to confirm.
Setup Menu 1 2 3 4 Setting the Digital output Speaker Setup The options included in Digital Audio are: ‘Digital Output’ and ‘LPCM Output’. In ‘AUDIO SETUP PAGE’, press 34 to highlight [DIGITAL AUDIO], then press 2. Press the 34 to highlight an option. Enter its submenu by pressing 2. Move the cursor by pressing the 34 to highlight the selected item. This menu contains setup options for audio output so that you can set your speakers to reproduce high quality surround sound. For details, see page 12.
Setup Menu In this mode, the high volume outputs are softened and low volume outputs are brought upward to an audible level. It is useful for watching your favorite action movie without disturbing others at night. 1 In ‘AUDIO SETUP PAGE’, press 34 to highlight [NIGHT MODE], then press 2. ON Select this to level out the volume. This feature is only available for movies with Dolby Digital mode. OFF Select this when you want to enjoy the surround sound with its full dynamic range.
Setup Menu Progressive This feature is only applicable if you have connected this DVD Player to a Progressive Scan TV through the Y Pb Pr jacks (see page 9). 1 In ‘VIDEO SETUP PAGE’, press 34 to highlight [PROGRESSIVE], then press 2. OFF To disable Progressive Scan function. ON To enable Progressive Scan function. 2 Press 34 to select a setting, then press ENTER/OK to confirm your selection. Notes on activating Progressive: – Ensure that your TV has progressive scan. – Connect with YPbPr video cable.
Setup Menu Selecting the black level (U.S.A. model only) If you set the TV type to NTSC, set Black level shift to ON. This will improve the color contrast during playback. The black level setting has no effect if the TV type is set to PAL. 1 In ‘VIDEO SETUP PAGE’, press 34 to highlight [BLACK LEVEL], then press 2. ON Select this to enhance the black level. OFF Select this for the standard black level setting. 2 Press 34 to select a setting, then press ENTER/OK to confirm your selection.
Setup Menu Preference Setup Menu 1 Press STOP ( 9 ) twice to stop playback (if any), then press SETUP. 2 Press 1 2 to select the ‘Preference Setup’ icon. 3 Press ENTER/OK to confirm. PREFERENCE PAGE AUDIO SUBTITLE DISC MENU PARENTAL PBC MP3/JPEG NAV VR LIST PASSWORD Audio, Subtitle, Disc Menu These menus contain various language options for audio, subtitle and disc menu which may be recorded on the DVD. For details, see page 12.
Setup Menu MP3/JPEG Navigator can be set only if the disc is recorded with menu. It allows you to select different display menus for easy navigation. 1 In ‘PREFERENCE PAGE’, press 34 to highlight [MP3/JPEG NAV], then press 2. WITHOUT MENU Select this to display all the files contained in the MP3/Picture CD. WITH MENU Select this to display only the folder menu of the MP3/Picture CD. 2 Press 34 to select a setting, then press ENTER/OK to confirm your selection.
Setup Menu 2 Press ENTER/OK to enter the ‘Password Change Page’. OLD PASSWORD NEW PASSWORD CONFIRM PWD (example for 6 thumbnail pictures display) 10 Use 1 234 to select a title, or use the numeric buttons to input the title number next to [SELECT]. ➜ Press S / T to access the previous/next page. 11 Press ENTER/OK to confirm the selection. To quit preview function • Use 1 234 to highlight [EXIT] and press ENTER/OK to confirm.
Language Codes Abkhazian Afar Afrikaans Albanian Amharic Arabic Armenian Assamese Avestan Aymara Azerbaijani Bashkir Basque Belarusian Bengali Bihari Bislama Bokmål, Norwegian Bosnian Breton Bulgarian Burmese Castilian, Spanish Catalan Chamorro Chechen Chewa; Chichewa; Nyanja Chichewa; Chewa; Nyanja Chinese Chuang; Zhuang Church Slavic; Slavonic; Church Slavonic; Church Chuvash Cornish Corsican Croatian Czech Danish Dutch Dzongkha English Esperanto Estonian Faroese Fijian Finnish French Frisian Gaelic; Sco
Language Codes These pages can be used to select other languages.This does not affect the options in “AUDIO”, “SUBTITLE” or “DISC MENU”.
Troubleshooting Problem Solution No power – Check if the AC power cord is properly connected. – Press the STANDBY/ON on the front of the DVD system to turn on the power. No picture – Refer to your TV’s manual for correct Video In selection. Change the TV input until you see the DVD screen. – Check if the TV is switched on.
Troubleshooting Problem 36 Solution Picture freezes momentarily during playback – Check the disc for fingerprints/scratches and clean with a soft cloth wiping from center to edge. The player does not respond to the Remote Control – Aim the Remote Control directly at the sensor on the front of the player. – Reduce the distance to the player. – Replace the batteries in the Remote Control. – Re-insert the batteries with their polarities (+/– signs) as indicated.
Glossary Aspect ratio: The ratio of vertical and horizontal sizes of a displayed image. The horizontal vs. vertical ratio of conventional TVs. is 4:3, and that of widescreens is 16:9. AUDIO OUT Jacks: Jacks on the back of the DVD System that send audio to another system (TV, Stereo, etc.). Bit Rate: The amount of data used to hold a given length of music; measured in kilobits per seconds, or kbps. Or, the speed at which you record.
Glossary Progressive Scan: I.t displays all the horizontal lines of a picture at one time, as a signal frame. This system can convert the interlaced video from DVD into progressive format for connection to a progressive display. It dramatically increases the vertical resolution. Region code: A system for allowing discs to be played back only in the region designated beforehand. This unit will only play discs that have compatible region codes.
Specifications AUDIO PERFORMANCE DVD Video DVD-Audio SA-CD multi-channel and SA-CD stereo Video CD & SVCD CD PICTURE CD CD-R, CD-RW DVD+R, DVD+RW DVD-R, DVD-RW DA Converter 24 bit Signal-Noise (1 kHz) 110 dB Dynamic range (1 kHz) 100 dB DVD fs 96 kHz fs 48 kHz SVCD fs 48 kHz fs 44.1 kHz CD/VCD fs 44.
UA DVD AUDIO/VIDEO SA-CD PLAYER LECTEUR DE DVD AUDIO/VIDEO SA-CD DVD-S657 OWNER’S MANUAL MODE D’EMPLOI ©2005 YAMAHA YAMAHA YAMAHA YAMAHA YAMAHA YAMAHA YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A. CANADA MUSIC LTD. 135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR. 22-34, 25462 RELLINGEN BEI HAMBURG, GERMANY ELECTRONIQUE FRANCE S.A.