A DVD PLAYER DVD-S661 i
CAUTION: READ THIS BEFORE OPERATING THIS UNIT. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 To assure the finest performance, please read this manual carefully. Keep it in a safe place for future reference. Install this unit in a well ventilated, cool, dry, clean place — away from direct sunlight, heat sources, vibration, dust, moisture, or cold. In a cabinet, allow about 2.5 cm (1 inch) of free space all around this unit for adequate ventilation.
Contents Introduction .................................. 3 Playback Operation ................... 15 Supplied accessories ................................. 3 Region codes .............................................. 3 Playable disc formats ................................. 3 Cleaning discs ............................................. 4 Patent information ...................................... 4 Basic operation ......................................... 15 Selecting a track/chapter .....................
Contents Setup Menu ................................. 22 General setup menu ................................. 22 Locking/Unlocking the disc for viewing ..........22 Dimming the front panel display ......................22 Programming disc tracks (except MP3/ WMA/JPEG/DivX) ..........................................22 OSD language ..................................................23 Setting the screen saver ....................................23 Setting the sleep timer ......................................
Introduction Introduction Thank you for purchasing this unit. This owner’s manual explains the basic operation of this unit. This manual is printed prior to production. Design and specifications are subject to change in part as a result of improvements, etc. In case of differences between the manual and the product, the product has priority. This unit can play the disc types associated Playable disc formats This unit is designed for use with discs having the logos shown below.
Introduction Cleaning discs • When a disc becomes dirty, clean it with a cleaning cloth. Wipe the disc from the center out. Do not wipe in a circular motion. • Do not use solvents such as benzine, thinner, commercially available cleaners, or antistatic spray intended for analog records. Patent information Manufactured under license from Dolby Laboratories. “Dolby”, “Pro Logic” and the double-D symbol are trademarks of Dolby Laboratories. “DTS” and “DTS Digital Out” are registered trademarks of DTS, Inc.
Functional Overview Functional Overview Front panel 1 2 3 45 1 STANDBY/ON Turns on this unit or sets it to the standby mode. 2 Disc tray Loads a disc in the disc tray. 6 Shows the current status of this unit. 7 PLAY ( p ) Starts playback. 8 PAUSE ( 4 HDMI indicator 9 STOP ( s ) Lights up when an HDMI component is connected, and signals output via the HDMI jack of this unit. 5 PROGRESSIVE indicator 0 6 Front panel display 3 OPEN/CLOSE ( ) Opens or closes the disc tray.
Functional Overview Rear panel PR MAINS COMPONENT Y VIDEO REMOTE CONTROL IN OUT AUDIO OUT HDMI 1 2 3 1 MAINS Plug the power cable into the AC wall outlet. 2 REMOTE CONTROL (IN, OUT) jacks Connect the REMOTE CONTROL (IN) jack of this unit to the remote control output jack of your Yamaha AV receiver. Connect the REMOTE CONTROL (OUT) jack of this unit to the remote control input jack of your Yamaha component (see page 11).
Functional Overview Remote control 5 l22 Moves to the previous chapter or track. Searches backward.* 6 7 1 2 0 Stops playback. Opens the disc tray.* 7 Numeric buttons (0-9) Selects numbered items in the currently displayed menu. 3 8 SUBTITLE 4 5 6 7 8 9 q w e r Selects the subtitle language (see pages 18 and 20). 9 ZOOM Enlarges the video image (see pages 16 and 19). 0 ON SCREEN t y u Accesses or exits from the on-screen display (OSD) menu of this unit (see page 17).
Connections Connections General notes on connections Be sure to turn off this unit and unplug the power cable before you make or change connections. • Depending on the component you want to connect, there are various ways to make connections. Possible connections are described below. • Refer to the manuals supplied with your other components as necessary to make the best connections. • Do not connect this unit via your VCR. The video quality could be distorted by the copy protection system.
Connections Component video jacks Video connections If your AV receiver has video output jacks, connect your receiver and then your TV so that you can use one TV for several different video sources (LD, VCR, etc.) by simply switching the input source selector of your receiver. This unit has several types of video output jacks. Use the one that corresponds to the input jacks of the component to be connected.
Connections HDMI connection Notes HDMI jack HDMI provides high quality digital audio and video on a single connection. Connect the HDMI jack of this unit to an HDMI input jack of your AV receiver, and then to that of your TV using a commercially available HDMI cable. If your receiver does not have an HDMI input jack, you can achieve a better video image by connecting the HDMI jack of this unit directly to the HDMI input jack of your TV.
Connections Other connections USB port This unit has a USB port and can access MP3, WMA, DivX and JPEG files saved on your USB device. Connect the USB port on the front panel of this unit to a USB port of your USB device. Remote control jacks This unit has remote control input/output jacks. If your AV receiver is a Yamaha product and has the capability to transmit of SCENE control signals, you can use the SCENE function.
Getting Started Getting Started Step 1: Inserting batteries into the remote control Using the remote control Use the remote control within 6 m of this unit and point it toward the remote control sensor. 3 1 Within 6 m 2 1 Open the battery compartment. 2 Insert the two supplied batteries (AAA, R03, UM-4) following the indications (+/–) inside the compartment. 3 Close the cover. Notes • Insert batteries correctly according to the polarity markings (+/–).
Getting Started Step 3: Setting a TV type/display and language You can customize this unit using the setup menu displayed on the TV screen. Notes • Unless stated otherwise, all operations described here are carried out using the supplied remote control. • To return to the previous menu, press 2. • To exit from the menu, press SET UP. NTSC Select this if the connected TV is an NTSC system TV. It will change the video signals of PAL discs and output them in NTSC format.
Getting Started Setting the audio, subtitle and disc menu languages (DVD-Video only) VIDEO SETUP PAGE TV TYPE TV DISPLAY PROGRESSIVE PICTURE SETTING HDMI SETUP 4:3 PAN SCAN 4:3 LETTER BOX 16:9 You can select your own preferred language for the audio, subtitle and disc menu. This unit automatically switches to the selected language whenever you load a disc. If the selected language is not available on the disc, the default language of the disc will be used instead. 1 Press SET UP.
Playback Operation Playback Operation Notes Selecting a track/chapter • If the prohibited icon ( ) appears on the TV screen when a button is pressed, the function for that button is not available on the current disc or at the current time. • Unless stated otherwise, all operations described here are carried out using the supplied remote control. • Depending on the disc, some operations may operate differently or be restricted. Refer to the instruction supplied with the disc.
Playback Operation MP3/WMA/DivX ➜ RPT ONE (repeat track) ➜ RPT FLD (repeat folder) ➜ SHUFFLE (shuffle) ➜ RPT OFF (repeat off) Playback in slow motion Note 2 During slow motion, press 5/a repeatedly For VCD, repeat playback is not available when the PBC mode is on. You can play back video in slow motion. 1 Press 5 for reverse slow motion or a for forward slow motion. to select the desired speed. 3 To resume normal playback, press 3 / 8 or ENTER.
Playback Operation Using the on-screen display (OSD) The OSD menu shows disc playback information (e.g., the title or chapter number, elapsed playing time or audio/subtitle language). A number of operations are possible without interrupting disc playback. 1 During playback, press ON SCREEN. ➜ A list of available disc information appears on the TV screen. 02/14 02/14 5.1CH ENG TITLE ELAPSED 0:02:25 the numeric buttons (0-9). ■ Time search (DVD/VCD) 2 Press ENTER.
Playback Operation ■ Repeat/Time Display (DVD/VCD) 1 Press 5/a to select [REPEAT] or [TIME DISP.]. Special VCD/SVCD features Using the playback control (PBC) menu 2 Press ENTER. 3 Press 5/a to highlight your selection, and then press ENTER. ■ Time display (CD) For a VCD with a playback control (PBC) feature (version 2.
Playback Operation 2 Playback starts automatically. If not, press 3/8 . 3 Press l22 / 33l to select another track/file in the current folder. Notes Using the preview function This function displays the content of the current folder or the entire disc. 1 Press 7 during playback. ➜ 12 thumbnails appear on the TV screen. • It may not be possible to play certain MP3/ WMA/JPEG/DivX discs due to the configuration and characteristics of the discs or the recording conditions.
Playback Operation Playback with multi-angles During playback, press 2 / 3/5/a to rotate the picture on the TV screen. 2: rotates the picture counter-clockwise 3: rotates the picture clockwise 5: flips the picture vertically a : flips the picture horizontally Note For HD JPEG, the 5/a key is not available. Playing MP3 music and JPEG pictures simultaneously 1 Load a disc that contains both MP3 music and JPEG picture data. ➜ The disc menu appears on the TV screen. 2 Select an MP3 music track.
Playback Operation Using a USB device Playing data files You can play back MP3, WMA, JPEG and DivX files saved on your supported USB device. Yamaha and suppliers accepts no liability for the loss of data saved on the USB devices connected to this unit. As a precaution, it is recommended that the files are tested after they have been saved on. Supported USB devices 1 Connect your USB device to the USB port This unit supports USB mass storage class devices (e.g.
Setup Menu Setup Menu Setup is carried out on the TV screen, enabling you to customize this unit to suit your own particular requirements. Notes • Unless stated otherwise, all operations described here are carried out using the supplied remote control. • To return to the previous menu, press 2. • To exit from the menu, press SET UP. LOCK Select this to lock playback of the current disc. Subsequent access to a locked disc requires a six-digit password.
Setup Menu ■ To start program playback 2 Press ENTER. ➜ The input menu appears on the TV screen. PROGRAM: TRACK (01-17) 1 2 3 4 5 6 7 8 9 10 04 10 __ __ __ EXIT __ __ __ __ __ START the program menu, and then press ENTER. ➜ Playback starts for the selected tracks in the programmed sequence. ■ To exit from program playback 9 Use 2 / 3/5/a to highlight [EXIT] on NEXT ■ To input your favorite tracks/ chapters 3 Use the numeric buttons (0-9) to enter a valid track/chapter number.
Setup Menu Setting the sleep timer This feature automatically sets this unit to the standby mode after a certain elapsed period. 1 In “GENERAL SETUP PAGE”, press 5/a to highlight [SLEEP], and then press 3. 2 Press 5/a to select a setting. • You can select from 30, 60, 90, 120 and 150 minutes. Select [OFF] to cancel the sleep timer function. 3 Press ENTER.
Setup Menu Setting the analog output Set the analog output to match the playback capability of this unit. 1 In “AUDIO SETUP PAGE”, press 5/a to highlight [ANALOG OUTPUT], and then press 3. STEREO Select this to change channel output to stereo, which only delivers sound from the two front speakers. LT/RT Select this if this unit is connected to a Dolby Pro Logic decoder. 2 Press 5/a to select a setting, and then press ENTER.
Setup Menu Notes • If you are not using the HDMI audio output, set this to [OFF]. • If the monitor/receiver connected to this unit using HDMI does not support HDMI audio signal input, set this to [OFF]. • This unit can output the following audio signals using HDMI: 32/44.1/48 kHz, 2ch linear PCM signals and bitstream signals (Dolby Digital, DTS and MPEG). • When audio signals are being output by HDMIcompatible components, digital output signals are muted.
Setup Menu Setting the TV display Set the aspect ratio of this unit to match your TV. The format you select must be available on the disc. Otherwise, the TV display setting will not affect the picture during playback. When the aspect ratio of your TV is 16:9 (widescreen): Setting Playback disc TV display 16:9 1 In “VIDEO SETUP PAGE”, press 5/a 16:9 to highlight [TV DISPLAY], and then press 3. *2 4:3 2 Press 5/a to highlight one of the following options.
Setup Menu Notes on activating progressive scan: • Ensure that your TV is equipped with progressive scan. • Connect using a component video cable. • When making HDMI connections, you cannot select [PROGRESSIVE]. CONSUMERS SHOULD NOTE THAT NOT ALL HIGH DEFINITION TELEVISION SETS ARE FULLY COMPATIBLE WITH THIS PRODUCT AND MAY CAUSE ARTIFACTS TO BE DISPLAYED IN THE PICTURE.
Setup Menu Setting the HDMI video When you connect this unit to an HDMI compatible component via the HDMI jack, select the following video output settings depending on the connected component. 1 In “VIDEO SETUP PAGE”, press 5/a to highlight [HDMI SETUP], and then press 3. 2 Press 5/a to highlight an option. 3 Press 3 to enter a submenu. WIDE SCREEN FORMAT Set the aspect ratio of the projected images on the screen.
Setup Menu Preference setup menu 1 In “PREFERENCE PAGE”, press 5/a to highlight [PARENTAL], and then press 3. 1 Press 7 twice to stop playback (if necessary), and then press SET UP. PREFERENCE PAGE 2 Press 2 / 3 to select “PREFERENCE AUDIO SUBTITLE DISC MENU PARENTAL VR LIST MP3/JPEG NAV DIVX SUBTITLE PBC PAGE”. 3 Press ENTER.
Setup Menu ORIGINAL LIST Select this to play the originally recorded titles on the disc. 1 In “PREFERENCE PAGE”, press 5/a to highlight [DIVX SUBTITLE], and then press 3. PLAY LIST GROUP1: Select this to play the edited version of the disc. This feature is only available when a play list has been created.
Setup Menu Selecting the PBC (playback control) function You can set playback control (PBC) to on or off. This function is available only on Video CD 2.0 with the playback control (PBC) feature. 1 In “PREFERENCE PAGE”, press 5/a to highlight [PBC], and then press 3. 2 Press ENTER to enter the “Password Change Page”. OLD PASSWORD NEW PASSWORD CONFIRM PWD OK ON Select this to display a disc menu. OFF Select this to not display a disc menu. Playback starts from the beginning of a disc.
Language Codes Language Codes These codes can be used to select other languages. This does not affect the options in “AUDIO”, “SUBTITLE” or “DISC MENU”.
Troubleshooting Troubleshooting Refer to the chart below when this unit does not function properly. If the problem you are experiencing is not listed below or if the instruction below does not help, set this unit to the standby mode, disconnect the power cable, and contact the nearest authorized Yamaha dealer or service center. Problem No power Solution Connect the AC power cable properly. Press STANDBY/ON on the front panel to turn on the power.
Troubleshooting Problem No sound or distorted sound Solution Adjust the volume. Check that the speakers are connected correctly. For MP3/WMA, check that the sampling rate and bit rate are compatible with this unit (see “Specifications” on page 39). No audio at digital output Check the digital connections. If you are playing a DTS source, check that your receiver can decode DTS, and that [DIGITAL OUTPUT] is set to [ALL] (see page 25).
Troubleshooting Problem Solution “NO DISC” appears in the front panel display Check that the disc is placed in the disc tray correctly. “UN DISC” appears in the front panel display The disc being loaded is not supported by this unit. Check the disc type (see “Playable disc formats” on page 3). Menu items cannot be selected Press 7 twice on the remote control before selecting the setup menu. Depending on the disc availability, some menu items cannot be selected.
Glossary ■ Analog Sound that has not been converted into numerical values. Analog sound varies, while digital sound has specific numerical values. These jacks send audio through two channels, the left and right. ■ Aspect ratio The ratio of vertical and horizontal sizes of a displayed image. The horizontal vs. vertical ratio of conventional TVs is 4:3, and that of widescreens is 16:9. ■ Audio output jacks Jacks on the back of the DVD player that send audio to another system (TV, Stereo, etc.).
Glossary ■ Interactive menu Interactive video menus offer unprecedented convenience and control so you can quickly navigate between various scenes or bonus features, and select from audio track and subtitle options. ■ JPEG A very common digital still picture format. A stillpicture data compression system proposed by the Joint Photographic Expert Group, which features small decrease in image quality in spite of its high compression ratio. ■ MP3 A file format with a sound data compression system.
Specifications Specifications PLAYABLE DISC FORMATS TV STANDARD • • • • • • • • • Number of lines ............................. PAL: 625, NTSC: 525 • Vertical frequency...................PAL: 50 Hz, NTSC: 60 Hz • Playback................................ Multistandard (PAL/NTSC) DVD-Video DVD-R, DVD-RW, DVD-R DL DVD+R, DVD+RW, DVD+R DL Video CD, SVCD CD PICTURE CD CD-R, CD-RW MP3 (ISO 9660) ................................. fs 32, 44.1, 48 kHz / 96, 128, 256, 320 kbps (CBR only) • WMA .................
©2007 YAMAHA YAMAHA YAMAHA YAMAHA YAMAHA YAMAHA YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A. CANADA MUSIC LTD. 135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR. 22-34, 25462 RELLINGEN BEI HAMBURG, GERMANY ELECTRONIQUE FRANCE S.A. RUE AMBROISE CROIZAT BP70 CROISSY-BEAUBOURG 77312 MARNE-LA-VALLEE CEDEX02, FRANCE ELECTRONICS (UK) LTD. YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD18 7GQ, ENGLAND SCANDINAVIA A.B.