Operation Manual

49 En
OTHER FEATURES
6
English
■ Switching to standby mode
Press STANDBY/ON on the front panel or STANDBY/
ON ( ) on the remote control.
→ The display screen goes blank.
■ Dimming the display screen
In any active mode, press DIMMER on the remote control
to select the desired brightness:
DIM 1: 70% brightness
DIM 2: 40% brightness
DIM OFF: normal brightness
■ Setting the sleep timer
The sleep timer switches the receiver to Eco Power
standby mode automatically at the preset time.
1 Press SLEEP on the remote control until “SLEEP XX”
appears in the display panel (
XX: 15, 30, 45, 60 or
OFF).
2 To select the next sleep timer value, continue pressing
SLEEP while in sleep timer mode until the desired
turn-off time is displayed.
→ “SLEEP” appears in the display panel, except
when “
SLEEP OFF” is selected.
→ Before the receiver switches to Eco Power
standby mode, a countdown of 10 seconds is
displayed.
“
SLEEP 10” → “SLEEP 9”.... →
“SLEEP 2” → “SLEEP 1”
To cancel the sleep timer
Press SLEEP until “
SLEEP OFF” appears.
■ Recording on an external AV
component
1 Connect the external recording component to LINE
OUT (see “Connecting external AV components” on
page 18).
2 Select the source to record from this DVD receiver
(DVD/CD, TUNER, AUX or USB) and start playback
(if necessary).
3 Start recording on the external recording device.
Refer to the owner’s manual of the connected
component for details.
Other functions
Note