Owner's Manual

Troubleshooting
52 En
No picture is displayed when you make HDMI
connections (using the HDMI terminals)
Follow the steps below to change [HDMI VIDEO] to [480P].
1. Press on the front panel or press and hold s on the remote control to
eject the disc.
2. Press on the remote control.
3. Press AUDIO on the remote control.
A disc cannot be inserted into the DVD receiver Turn on the DVD receiver and insert the disc after “NO DISC” appears on the
display panel.
Wait for a while and insert the disc after “NO DISC” appears on the display
panel.
Eject the disc from the DVD receiver, and then insert the disc you want to play
back after “NO DISC” appears on the display panel.
Press or p, or remove the disc from the disc loading slot fully and then
insert it once again.