Manual
• Types of video jacks
• Types of audio jacks
O COAXIAL jack
Connects a coaxial pin cable and provides the better
quality sound than analog audio jacks.
COMPONENTVIDEO jacks (U.S.A., Canada,
Australia and General models)
Transmit color difference (PB/CR, P_dCR) and lmninance
separately and provide the best quality picture.
VIDEO jack
Conventional composite video signal.
SVIDEO jack
Transmits color and luminance separately and achieves
high-quality color reproduction.
OPTICAL jack
Connects an oplical fiber cable and provides the better
quality sound than analog audio jacks.
Analog audio jacks
Connect an audio pin cable.
..4..
• O and O are digital jacks.
• You can use the digital jacks to input PCM, Dolby Digital and
DTS bitstreams.
• All digital input jacks are acceptable l\)r 96-kHz sampling
digital signals.
• Each type of video jack works independently. Signals input
through the composite video and S video jacks are only output
through the corresponding composile video and S video jacks.
• When you connect this unit to a video monitor, a video
component and a recording component, connect the same types
of jack, for example, the video jack on this unit to the video
jack on the video component.
• The description of the component video jacks may differ
depending on the component (e.g. Y, C_, C_/Y, Pt_, Pa/Y, B-Y,
R-Y etc.). When using these jacks, rel_r also to the operation
instructions for the component being connected.
• Do not connect this nnit to a video monitor through a video
cassette recorder. If you do so, the picture may not be played
back properly due to the copyright protection technology
incorporated in this unit.
• When progressive output (p.38) is selected in the DVD mode.
video signals are only output from the component video jacks.
• DIGITAL OUTPUT jack and analog OUT (Rec) jacks are
independent. Only digital signals are output from DIGITAL
OUTPUT jack and analog signals from OUT (Rec) jacks.
• The OPTICAL jacks on this unit coni'orm m the EIA standard.
If you use an optical cable that does not conlk_rm to this
standard, this unit may not tunction properly.
• Once you have connected a recording component to this unit,
keep its power turned on while using this unit. If the power is
off, this unit may distort the sound from other components.
Anti-dust cap
Remove the cap covering the OPTICAL jacks when
connecting an optical cable. Safely store the cap and
always re-insert it in the terminal when the lerminal is not
in use. (This cap prevents the entrance of dust.)
Anti-dust cap
14