Manual

When you adjust speakers while DISC DIRECT is

functioning, follow the procedures described below.

A,v, <,>

/ ENTER

(U.S.A. model)

If you wish 1o enjoy multi-channel sound reproduction,

you need Io select "Multi-channeW on the setup menu and

make following adjustments.

When you select "2-channel", that is, when connecting to

only 2 speakers or a Dolby Pro Logic decoder, the

following adjustments are not necessary.

iFront(L) Front (R) I

Exit

@ Output mode

Change the settings of each speaker in accordance with

your speaker system.

U Press the cursor buttons (/% v, <, _) to

select a speaker and press ENTER.

P_I Press the cursor buttons (/% v) to select the

setting and press ENTER.

• Choices of the speaker size

L: Large, Small

R: Large, Small

C: Large, Small, None

SW: Used, No1 used

LS: Large, Small, None

RS: Large, Small, None

The size of L is set 1o be the same as that of R.

Therefore, if you select Large for L, the size of R is

automatically set to Large. This also applies to the

sizes of LS and RS.

• Example: Rear lefl speaker

(I) when the speaker is not used.

@ when using a large speaker capable of low-

frequency (under 1O0 Hz) output.

@ when using a small speaker 1hal is not capable of

low-frequency output. (the included speakei_s,

NX-S 100S elc.)

• Factory settings of 1he speaker sizes

L/R: Large

C/LS/RS: Large

SW: Used