Manual

Use this feature Io select suitable ou|put modes for your
speaker configuration.
If you do no1 use one or any of the included speakers, or
if you use other speakez_s instead of the included speakers,
set the following.
• When 96-kHz sampling digital signals are input to this unit,
some items are no_ affected.
• 1A CENTER (center speaker
mode)
By adding a center speaker to your speaker configuration,
this unit can provide better dialog localization for several
listeners and superior synchronization of sound and
images.
Choices: LRG (large), SML (small), NON (none)
LRG
Select this if you have a large center speaker. The entire
range of the center channel signal is directed to the center
speaker.
SML
Select this if you have a small center speaker. The low-
frequency signals (90 Hz and below) of the center
channel are directed to the speakers selected with "1D
BASS".
NON
Select this if you do not have a center speaker. All of the
center channel signals are directed to the front left and
right speakez_s.
• 1B FRONT (front speaker mode)
Choices: LARGE, SMALL
LARGE
Select this if you have large front speakez_. The entire
range of the front let1 and right channel signal is directed
to the front left and right speakers.
SMALL
Select this if you have small front speakers. The low-
frequency signals (90 Hz and below) of the front channel
are directed to the speakers selected with "1D BASS".
• When you select FRONT for "ID BASS", the low-l)'equency
signals (90 Hz and below) of the t_mt channel are directed m
the front speakers even if you select SMALL for the front
speaker mode.
• 1C REAR LR (rear speaker mode)
Choices: LRG (large), SML (small), NON (none)
LRG
Select this if you have lm'ge rear let1 and right speakers or
if a rear subwoofer is connected to the rear speakers. The
entire range of the rear channel signal is directed to the
rein" left and right speakez_s.
SML
Select this if you have small rein" left and right speakers.
The low-frequency signals (90 Hz and below) of the rein"
channel are directed to the speakers selected with "1D
BASS".
NON
Select this if you do not have rear speakers.
.,+,:
• This unit is set in the virtual CINEMA DSP mode when you
select NON l\)r "IC REAR LR'.
6O