Manual

It is possible Io assign jacks according 1othe component

to be used if this unit's DIGITAL INPUT jack settings

(component names for jacks) differ from thai component.

This makes it possible to change the jack assignment and

effectively connect more components.

Once you assign, you can select that component with

INPUT • / • on the front panel (or the input selector

buttons on the remole control).

• [A] OPTICAL INPUT jack

Choices: VIDEO 1, VIDEO 2, VCR, MD/CD-R

• [B] COAXIAL INPUT jack

Choices: VIDEO 1, VIDEO 2, VCR, MD/CD-R

Use Ibis feature Io designate the input mode for sources

connected to the DIGITAL INPUT jacks when you turn

on this unit.

Choices: AUTO, LAST

AUTO

Select this to allow this unit to aulomatically delect the

type of input signal and select the appropriale input mode.

LAST

Select this to set this unit to aulomalically select the last

input mode used for the respective source.

• When you connect a component to both the COAXIAL and

OPTICAL jacks, priority is given to the input signals from the

COAXIAL jack.

Choices: SP, PRE

Select this to direct signals to the speakei_s connecled 1o

the subwoofer (SW-S 100). (No sound is output from 6CH

PREOUT jacks.)

PRE

Select this to direct signals m 6CH PREOUT jacks or if

you connect your external amplifier m 6CH PREOUT

jacks on this unit. (No sound is oulput from the speakers

connected to the subwoofer (SW-S 100).)