Manual

Refer to the chart below when this unit does not function properly. If lhe problem you are having is not lisled below or if
the instruction below does no1 help, set this unit to the standby mode, disconnect the power cord, and contact the nearest
authorized YAMAHA dealer or service cenler.
• General
Problem Cause Remedy Refer
to page
This unit fails to turn Tile power cord is not connected or the plug Firmly connect the power cord.
on when STANDBY/ is no_ completely inserted.
ON(or POWER (O/I))
is pressed, or enters
in the standby mode This unit has been exposed to a strong Set this unit in the standby inode, disconnect
soon after the power external electric shock (such as lighming and the power cord, plug i_ hack in atier 30 seconds
has been turned on. strong static electricity), then sta_l operaling.
No Sound= Incorrect input or output cable connections. Connect the cables p]'operly. If _he problem 14 19
persists the c_bles [nay be defective.
An appropriate input source has not been Select an appropriate input source with the 21
selected, input selector buttons.
The speaker connections are not secure. Secure the connections. 17 18
The volume is turned down. Turn up the volume. 21
The sound is muted. Press MUTE or any operation buttons of this 21
unit to cancel a mute and adjust the volume.
The source that this unit cannot reproduce, Play a source whose signals this unit can
such as a CD-ROM, is being played, reproduce.
The picture does not The output and input for the picture arc Make connections using the same type of video 14
appear, connected to different _ypes of video jacks, jacks (S VIDEO or VIDEO (composite)) ft_r
both lhe input and output.
The sound suddenly The sleep timer has functioned. Turn on the power, and play the source again. 22
goes off.
Only the speaker on Incorrect c_ble connections. Connect the cables p]'operly. If _he problem 17 18
one side can be persists, the c_bles [nay be defective.
heard.
Sound can be heard The sound effect is off. Press STEREO to turn it on. 27
only from the front A Dolby Surround, Dolby Digital or DTS Select another DSP program. 23 24
speakers, decoding DSP program is being used with
material not encoded with Dolby Surround,
Dolby Digital or DTS.
A 96-kHz sampling digital signal is being When a 96-kHz sampling digital signal is being 27
input _o this unit. input to this unit, sound is output from the front
speakers only.
67