Owner's Manual
Table Of Contents
- IMPORTANT SAFETY INSTRUCTIONS
- CAUTION: READ THIS BEFORE OPERATING YOUR UNIT.
- CONTENTS
- Preparation
- Basic Operations
- Viewing a DVD
- Useful Features
- Selecting the Audio Language
- Selecting the Subtitle Language
- Moving Forward and Backward
- Adjusting the Audio Volume
- Pausing Playback
- Switching the Viewing Angle
- Restarting Playback from the Stop Position (Memory Resume)
- Enhancing the Sound Presence
- Turning off the Sound
- Controlling the DVDs Your Children Can View
- Enhancing Video Quality
- Answers to Common Problems
- Sound Presence
- Advanced Features
- Selecting the Media Device
- Playing Video and Music Discs
- Listening to the Radio
- Using Other Equipment
- Creating the Best Listening Space
- More Information about DSP (Surround) Effects
- Selecting DSP Program Effects
- Using Matrix 6.1
- Using All Speakers for CD or Video playback
- Using Front Speakers Only for DSP Program (Virtual Cinema DSP)
- Using a DSP Program with Headphones (SILENT CINEMA)
- Using a DSP Program with Low Volume (Night Listening)
- Changing the Delay Time of a DSP Program
- Reproducing the Original Dolby and DTS Sound
- Reproducing Stereo Sound
- Selecting DSP Program Effects
- Types of Input Signals
- Additional Features
- Operating Other Equipment with the CinemaStation Remote Control
- Using the SET MENU
- Using the On Screen Menu
- Appendix
42
Listening to the Radio
You can manually preset up to 40 radio stations.
A/B/C/D/EMEMORY
PRESET/TUNING u
d PRESET/TUNING
• When presetting a radio station, you can set the frequency and reception mode (stereo/monaural) at the same time.
• You can change the order of preset FM radio stations later. See page 43, “Changing the Order of Preset Stations”.
• If the number of radio stations that have been preset is less than 40, Auto Preset automatically stops after searching the whole
frequency range.
• If a new radio station is preset for a Preset Number, the previously preset station for the Preset Number is deleted.
• In Auto Preset, only FM radio stations with a strong signal are set. To preset radio stations with a weak signal set reception mode
to monaural and preset manually.
Manually preset stations in advance (Manual Preset)
Select radio stations you want to preset.
See page 39, “Selecting Radio Stations”.
The frequency and broadcast band (FM or AM) of the
tuned-in station appear in the CinemaStation Display.
Press MEMORY.
The MEMORY indicator blinks for about 5 seconds in the
CinemaStation Display, which means CinemaStation is
ready to preset.
While the MEMORY indicator is blinking, press
A/B/C/D/E to select the Preset Group (A to E).
The Group appears. Check that the colon (:) beside the
band indicator lights up.
While the MEMORY indicator is blinking, press
PRESET/TUNING u/d to select a Preset Number
(1 to 8).
Press u for a larger number and d for a smaller number.
While the MEMORY indicator is blinking, press
MEMORY.
The selected Preset Group and Number, broadcast band
(FM or AM) and frequency appear in the CinemaStation
Display.
Repeat steps 1 to 5 to manually preset other
radio stations.
Advice
Note
Display
010DVX-S120-en 03.8.5, 1:45 PM42