Owner's Manual
Table Of Contents
- IMPORTANT SAFETY INSTRUCTIONS
- CAUTION: READ THIS BEFORE OPERATING YOUR UNIT.
- CONTENTS
- Preparation
- Basic Operations
- Viewing a DVD
- Useful Features
- Selecting the Audio Language
- Selecting the Subtitle Language
- Moving Forward and Backward
- Adjusting the Audio Volume
- Pausing Playback
- Switching the Viewing Angle
- Restarting Playback from the Stop Position (Memory Resume)
- Enhancing the Sound Presence
- Turning off the Sound
- Controlling the DVDs Your Children Can View
- Enhancing Video Quality
- Answers to Common Problems
- Sound Presence
- Advanced Features
- Selecting the Media Device
- Playing Video and Music Discs
- Listening to the Radio
- Using Other Equipment
- Creating the Best Listening Space
- More Information about DSP (Surround) Effects
- Selecting DSP Program Effects
- Using Matrix 6.1
- Using All Speakers for CD or Video playback
- Using Front Speakers Only for DSP Program (Virtual Cinema DSP)
- Using a DSP Program with Headphones (SILENT CINEMA)
- Using a DSP Program with Low Volume (Night Listening)
- Changing the Delay Time of a DSP Program
- Reproducing the Original Dolby and DTS Sound
- Reproducing Stereo Sound
- Selecting DSP Program Effects
- Types of Input Signals
- Additional Features
- Operating Other Equipment with the CinemaStation Remote Control
- Using the SET MENU
- Using the On Screen Menu
- Appendix
45
Listening to the Radio
Listening to the Radio
English
Change RDS Mode
There are four RDS display modes. When an RDS
station is broadcasting, PS, PTY, RT or CT mode
indicators corresponding to the services provided
light up in the CinemaStation Display. Press
FREQ/RDS repeatedly to change among the
modes supported by the currently tuned RDS
station.
Note
• When an RDS station is broadcasting, do not press FREQ/RDS until
one or more mode indicators light up in the CinemaStation Display. If
you press FREQ/RDS before the mode indicators light up,
CinemaStation may not be able to change modes.
• RDS information not provided by a station cannot be selected.
• If the RDS station’s signal transmission is too weak, CinemaStation
may not be able to use the service fully. In particular, radio text uses a
lot of bandwidth, so it may not be available even when other modes
are selectable.
• RDS information may not transmit under poor conditions. In this
case, press AUTO/MAN’L to set CinemaStation to Manual Tuning
mode. This changes reception to monaural and may help RDS
information reappear when you switch to RDS display mode.
• If outside interference disrupts an RDS station broadcast, RDS
information may suddenly disappear and “...WAIT ” appears in the
CinemaStation Display.
About PTY SEEK
Press PTY SEEK MODE to set CinemaStation to
PTY SEEK mode.
The program type of the tuned in station or NEWS blinks
in the CinemaStation Display.
Press PTY SEEK START to start searching all
preset RDS stations.
The selected program type flashes and the PTY HOLD
indicator lights up while the search is in progress.
If the search finds a station that matches the program type
you selected, CinemaStation will tune it in.
If the station tuned in is not the one you want press PTY
SEEK START again to continue the search for other
stations broadcasting the program type you selected.
Press PRESET u/d to select the program type
you want.
Your program type selection appears in the
CinemaStation Display.
When you select the program type, CinemaStation automatically
searches through all preset stations currently broadcasting for
that type.
To cancel steps 1 or 2
Press PTY SEEK MODE twice.
PS
PTY
RT
CT
RDS mode OFF
011DVX-S120-en 03.8.5, 1:46 PM45