Owner's Manual
Table Of Contents
- IMPORTANT SAFETY INSTRUCTIONS
- CAUTION: READ THIS BEFORE OPERATING YOUR UNIT.
- CONTENTS
- Preparation
- Basic Operations
- Viewing a DVD
- Useful Features
- Selecting the Audio Language
- Selecting the Subtitle Language
- Moving Forward and Backward
- Adjusting the Audio Volume
- Pausing Playback
- Switching the Viewing Angle
- Restarting Playback from the Stop Position (Memory Resume)
- Enhancing the Sound Presence
- Turning off the Sound
- Controlling the DVDs Your Children Can View
- Enhancing Video Quality
- Answers to Common Problems
- Sound Presence
- Advanced Features
- Selecting the Media Device
- Playing Video and Music Discs
- Listening to the Radio
- Using Other Equipment
- Creating the Best Listening Space
- More Information about DSP (Surround) Effects
- Selecting DSP Program Effects
- Using Matrix 6.1
- Using All Speakers for CD or Video playback
- Using Front Speakers Only for DSP Program (Virtual Cinema DSP)
- Using a DSP Program with Headphones (SILENT CINEMA)
- Using a DSP Program with Low Volume (Night Listening)
- Changing the Delay Time of a DSP Program
- Reproducing the Original Dolby and DTS Sound
- Reproducing Stereo Sound
- Selecting DSP Program Effects
- Types of Input Signals
- Additional Features
- Operating Other Equipment with the CinemaStation Remote Control
- Using the SET MENU
- Using the On Screen Menu
- Appendix
![](/manual/yamaha/dvx-s120/1-owner-s-manual-english/images/img-55.png)
51
Using Other Equipment
Using Other Equipment
English
Advice
Advice
• When you assign the OPTICAL IN jack as VIDEO and equipment is
connected to the VIDEO IN jacks, the OPTICAL IN jack has priority
over the VIDEO IN jacks if the input mode is set to AUTO.
• CinemaStation’s digital and analog signal circuits are
independent of each other, so analog input signals can only
output from analog output jacks and digital input signals can
only output from digital output jacks.
• CinemaStation’s optical digital jack is designed based on EIA
standards. If you use an optical cable that does not meet EIA
standards, it may not function properly.
• The digital jacks are compatible with PCM, Dolby Digital and
DTS signals.
• The OPTICAL IN jack is compatible with a digital signal that
has a 96 kHz or less sampling frequency.
• You can use “* Input Assign” in the SET MENU to assign
VIDEO or VCR to the OPTICAL IN jack. The default setting
is VIDEO.
Set to VIDEO (default setting)
Press VIDEO on the Remote Control to input a signal from CD
recorder or MD recorder.
Set to VCR
Press VCR on the Remote Control to input a signal from CD
recorder or MD recorder.
• When you assign the OPTICAL IN jack as VCR and equipment is
connected to the VCR IN jacks, the OPTICAL IN jack has priority
over the VCR IN jacks if the input mode is set to AUTO.
Notes on the digital audio jacks
For details about assigning OPTICAL IN jacks see page 88,
“Using the SET MENU”. For details about input modes see
page 77, “Switching Input Modes”.
CINEMA
AMP
DVD/CD
VCR
VIDEO
TUNER
MOVIE MUSIC SPORTS GAME
VIDEO
VCR
011DVX-S120-en 03.8.5, 1:46 PM51