Owner's Manual
Table Of Contents
- IMPORTANT SAFETY INSTRUCTIONS
- CAUTION: READ THIS BEFORE OPERATING YOUR UNIT.
- CONTENTS
- Preparation
- Basic Operations
- Viewing a DVD
- Useful Features
- Selecting the Audio Language
- Selecting the Subtitle Language
- Moving Forward and Backward
- Adjusting the Audio Volume
- Pausing Playback
- Switching the Viewing Angle
- Restarting Playback from the Stop Position (Memory Resume)
- Enhancing the Sound Presence
- Turning off the Sound
- Controlling the DVDs Your Children Can View
- Enhancing Video Quality
- Answers to Common Problems
- Sound Presence
- Advanced Features
- Selecting the Media Device
- Playing Video and Music Discs
- Listening to the Radio
- Using Other Equipment
- Creating the Best Listening Space
- More Information about DSP (Surround) Effects
- Selecting DSP Program Effects
- Using Matrix 6.1
- Using All Speakers for CD or Video playback
- Using Front Speakers Only for DSP Program (Virtual Cinema DSP)
- Using a DSP Program with Headphones (SILENT CINEMA)
- Using a DSP Program with Low Volume (Night Listening)
- Changing the Delay Time of a DSP Program
- Reproducing the Original Dolby and DTS Sound
- Reproducing Stereo Sound
- Selecting DSP Program Effects
- Types of Input Signals
- Additional Features
- Operating Other Equipment with the CinemaStation Remote Control
- Using the SET MENU
- Using the On Screen Menu
- Appendix
83
Operating Other Equipment with the CinemaStation Remote Control
Operating Other Equipment
with the CinemaStation Remote Control
Storing Manufacturer Codes in the Remote
Control
If you set the manufacturer code (a unique code assigned to each
manufacturer) in the CinemaStation Remote Control, you can operate a
connected television, VCR, CD or MD recorder with the Remote Control.
• Depending on the model, the Remote Control may not work, or only work with a limited
number of functions. In this case, use the remote control that came with the television, VCR,
CD or MD recorder.
Setting the Manufacturer Code
When a manufacturer code is set for the TV button or VCR
button, you can begin using the features described in
“Available Operations” on page 84.
TV
CH
CINEMA
CH
POWER
POWER
AUDIO
/
DTS
SELECT
NIGHT
SW
TV CH
TV INPUT
SLEEP
PRESET PRESET
A B C D E
CENTER
SURR
SHIFT
STEREOMATRIX 6.1
A-B
REPEAT
ANGLE
SUBTITLE
DVR-S120 WB56650
ON SCREEN MENU
TEST
RETURN
STATUS
TV VOL
VOLUME
MUTE
AMP
DVD/CD
VCR
VIDEO
TUNER
MOVIE MUSIC SPORTS GAME
SET MENU
ENTER
TV
SHIFT
VCR
Note
Note
Note
Make sure that you set the correct manufacturer
code.
With a manufacturer code set for the TV button, press the
button to turn the TV power on/off (standby), and check
that the setting is working correctly.
With a manufacturer code set for the VCR button, press
the button then the features described in “Available
Operations” on page 84, and check that the setting is
working correctly.
• The TV button has 299 and the VCR button has 399 as the factory
default setting for manufacturer code.
Advice
While holding down SHIFT, enter the
manufacturer code (3 digits) of the device with
the Number buttons.
For details, refer to “Manufacturer Code List” on
pages 86 and 87.
When the setting succeeds, “Code Set OK” appears;
however, when it does not, “Code Set NG” appears in the
CinemaStation Display. If setting is unsuccessful,
perform steps 1 and 2 again.
When finished entering the code, release your finger from
SHIFT.
• Perform steps 1 to 2 while holding down SHIFT.
While holding down SHIFT, press TV or VCR.
Each button can be assigned one manufacturer code.
• For the TV button you can only set a television manufacturer code and
for the VCR button you can only set a VCR, CD or MD recorder
manufacturer code.
Number
buttons
English
016DVX-S120-en 03.8.5, 1:50 PM83