Manual

Input signal information

• (Format)

Shows the input signal format. When file digilal input

cannot be recognizezl, the mode is set to analog,

__la]og Audio Analog

IKTM Audio PCM

Ddiby Digital Audio Do]by DGTL

DTS Audio DTS

Oilier Digilal Signals Unknwn DGTL

• (Audio Channels)

Shows the armlber of"audio channels an input signal

contains (only when Dolby Digital or DTS is inpuf).

For example, "in: 3i2iLFE" indicates 3 Front Channels,

2 Surround Channels and LFE.

"] +]" indicates Main + Sub in bilingual broadcasts or

other 2 channel audio, and MLT indicates 3-channel or

more multi-channel audio,

• fs

Shows file frequency sampling of an input signal (on])"

when digital signal is input)!, If the sampling frequency

cannot be measured, "unknown" appears,

• rate (bit rate)

Shows the amount of data an input signal contains per

second (unly Dolby Digital and DTS). If the bit rate

cannot be measured, "unkmown" appears.

• flg(nag)

Shows a roaognifiun signal (flag), in an input signal and

initiates an action (only Ddiby Digital and DTS). If the

flag cannot be recognized, "None" appears,

Note on digital signals that exceed 48 kHz

CinemaStation's digital input jack can input a smnpling

frequency up to 96 kItz. For details read the owner's

manual of the devic_ connoatcxl to the digital input jack.

Koap in mind the points below when inputting a digital

signal that exceeds 48 kItz.

• DSP Programs are not seloatable. You can only listea to

normal 2-channel stereo frtml the Front Speakers.

• During playback, you cannot adjug the vditmle lCNClof

Centes and Surround IJR Speakers.

• Depending on the "* Speaker Set" _Zting in the SET

MENU, the Subwoofcs may output sound.