Service manual

DVR-S120/NX-P120
DVR-S120
NX-P120
23
● Starting DIAG
While pressing the “A/B/C/D/E” key on the main unit, press
the “STANDBY/ON” key until the FL display lights up. Within
4 seconds after that, press the “PRESET/BAND” key to start
the DIAG function.
 
本体の“A/B/C/D/E”キーを押しながら“STANDBY/ON”
キーを押し、表示点灯後4秒以内に“PRESET/BAND”
キーを押すとダイアグが起動します。
 

  



● Canceling DIAG
 
1 ダイアグを解除する前に、ダイアグメニュー No. 8 の
FACTORY PRESET （メモリーの初期化禁止 / または
メモリーの初期化）の設定をします。
  

2 本体の“STANDBY/ON ”キーを押し、パワーオフに
します。
A/B/C/D/E
STANDBY/ON
PRESET/BAND
FL Display /
 
1 Before canceling DIAG, execute setting for PRESET of
DIAG menu No.8 (Memory initialization inhibited or
Memory initialized).
* In order to keep the user memory stored, be sure to se-
lect PRESET INHIBITED (Memory initialization inhibited).
Protection history will remain in memory.
2 Turn off the power by pressing the “STANDBY/ON” key of
the main unit.
* In the DIAG mode, all the protection functions other than
the excess current detect function are canceled, and the
"SLEEP" segment of the FL display of the main unit
flashes. Please note, therefore, that no protection func-
tion works even when a dangerous situation occurs while
using the DIAG mode.