Manual

Antenna connections
Outdoor FM antenna
(not supplied)
AM loop antenna
Indoor FM antenna
l
7_._ .....
.)
DVR-S60
in areas close to a transmitter the simple indoor antenna is sufficient to
receive broadcasts. Extend the antenna wire as straight as possible and,
while listening to the sound from the system, secure it in a position which
yields minimal distortion and noise.
in fringe areas or where reception is distorted or noisy, an external
antenna (not supplied) should be connected instead of the simple indoor
antenna. Consult your dea{er.
AM loop antenna
Assemble the loop antenna.
Unwind the antenna wires, then connect them to the AM
ANTterminals, Place the loop antenna in a position which
yields the best AM reception, or attach it to a wail or other
surface.
II_i_W_S (not supplied)'{'J_
Note:
To minimize noise, the speakers, power cable and any
other cable should not come close to the indoor or
external antenna cable and AM loop antenna. Do not
place the antenna cables close to the system.
Connecting to a TV with the video pin cable
Connect the video pincable between the MONITOROUT VIDEO jackof the unit and the video input jack of the TV.
DVR-S60
Video pin cable
TV
Notes on connections
Please refer to the instruction manuals for the components that you are connecting (TV, VCR, etc.).
When you connect the unit to your TV and other equipment, be sure to turn off the power and disconnect ail of the equipments from the AC outlet until
all the connections have been made.
Do not connect the MONITOR OUT (S VIDEO/VIDEO) and COMPONENT VIDEO OUT jacks of the unit to a VCR directly. The playback picture
will be distorted because DVD discs are copy protected.
Please consult your local audio/video dealer for more details.
E-9