Manual

Progressive-scan TV connections

Your TV must be capable of handling progressive scanning and have component video input capability.

Component video cable (not supplied)

DVR-S60

Red

To AC 120V, 60Hz

TV with progressive-scan capability

Ptease fotlow the steps below before turning on the power.

1. Connect the component video cable (not supplied) between the

COMPONENT VIDEO OUT jacks of the unit and the COMPONENT

VIDEO INPUT jacks of the TV.

2. Set the VIDEO OUT SELECT switch to the COMPONENT position.

3. Set the VIDEO OUT SCAN SELECT switch to the SELECTABLE

position.

4. Select "COMPONENT OUTPUT: PROGRESSIVE" in "Display" on

the SETTINGS ON THE SET UP MENU. (See page 16.)

Notes:

Please refer to the instruction manual of your TV.

When you connect the unit to your TV, be sure to turn off the power

and disconnect both units from the wall outlet until all the connections

have been made.

Do not connect the unit to a VCR directly. The playback picture will be

distorted because DVD video discs are copy protected.

After the above connections have been made, there are no video

signals from the MONITOR OUT VIDEO and VIDEO 1 VIDEO OUT

jacks.

Progressive Scanning

While interlaced scanning produces one frame of video in two fields,

progressive scanning creates one frame in one field. Conventional

interlaced scanning constitutes one second with 30 frames (60 fields), but

progressive scanning constitutes itwith 60 frames from scratch. Progressive

scanning can reproduce sharper picture with high resolution for still image

or other picture containing long texts or horizontal lines.

This model has compliance with 525p (progressive) system.

interlaced scanning

Progressive scanning

Headphones

Connectstereo headphones (notsupplied)to the PHONESjack for monitoringor for privatelistening. Thespeakers areautomatically disconnected when

headphones are connected.

E-11