Manual

Important note:
This "DISC PLAY" explains the basic instruction of the DVD
player section using the remote control unit.
Some DVD or Video CD discs have different functions that may not
be explained in this instruction manual. You may need extra
instructions, in this case, please follow the instructions displayed
on the TV screen or the jacket or case of the disc.
"_ " may appear on the TV screen during operation. This icon
means that the function is not available on the current disc.
Preparations
Turn on the TV and select the channel for the DVD player.
Select the playback picture size suitable for the aspect ratio of the TV.
(See "Display" under "SETTINGS ON THE SET UP MENU" on Page
f6.)
Select the desired language for the screen menus. (See "OSD" -
"Language" under "SETTINGS ON THE SET UP MENU"on Page 16.)
Note:
Do net touch the disc tray while it is moving.
Never place anything except a disc on the disc tray. Foreign objects
can damage the unit.
Do not apply excessive force to the disc tray.
Only one disc can be placed on the disc tray.
To open or close the disc tray, be sure to use the A button. De not press
the disc tray with your hand.
When an operation button is pressed, that operation is displayed /
on the TV screen. The display turns off after several seconds.
If a disc is loaded, you can turn the unit on and begin play immediately /
by pressing the I_- button.
1. Press the & button. "OPEN" appears on the display and the disc tray
opens. "YAMAHA" logo appears on the TV screen.
2. Place the disc with the label facing up on the disc tray.
12 cm disc 8 cm disc
3. Press the & button again to close the disc tray.
Some discs may start play automatically.
Starting play
Press the I_- button. The DVD function is selected and play starts
automatically,
Example:
I U.U
If a menu appears on the TV screen.,,
Press the A, I_, • or < button (or the number
buttons), then press the ENTER button to select
the desired menu. Playback of the selected menu
will start.
Note:
For more details, please refer to the jacket or
case of the disc.
@
Remote control
Stopping play
Press the • button once.
When you press the _ button, play starts automatically from the
point where you stopped.
Note:
Some discs may not resume play.
Press the • button twice. The player stops completely.
When you press the _ button, play starts from the beginning of the
disc.
Continuing play from where you stopped watching (LAST MEMORY
PLAY) [DVD]
1. During play, press the LAST MEMO button at the point from which you
want to resume play later. "LM.-STOP" appears on the display. Play
stops automatically.
2. Remove the disc or turn off the power.
3. Load the disc (and press the ID_ button), or turn on the power. "Last
Memory Play?" screen appears.
Last Memory Play?
Yes
No
Clear ... The memory is released.
4. Press the • or • button to select "Yes".
5. Press the ENTER button. Play resumes from the point where you
stopped. (if desired, press the LAST MEMO button again.)
Note:
Points on up to 5 discs can be memorized.
The Last Memory Play mode may net work correctly with some discs.
What is "PBC"?
"PBC" is an abbreviation for "Playback Control" that refers to control codes
prerecorded on Video CDs.
During playback of a Video CD with PBC, "PBC" appears on the display.
To lock the disc tray (Using the main unit)
You can lock the disc tray to prevent misuse of young children. ]
While the disc tray is opened, press the A button until 'LOCKED"|
appears on the TV screen, i
- The A button will not function. , i
To release this mode, press the A button until' UNLOCKED" appears. J
Note:
if "NO DISC" appears on the display, load the disc.
if the disc is leaded with the label side downward (and it is a single
sided disc), or if a badly scratched disc is loaded, "NO DISC" (or "NO
PLAY") appears. If this occurs, load the disc correctly or replace the
disc.
E-15