Specifications

58
LOWER UNIT & POWER TRIM & TILT/MIDSECTION TOOLS
Part# Description/Use Application
4&6 CYLINDER 4-STROKE
YB-06195-A Oil Seal Installer
it installs both oil seals properly into the reverse gear bearing
housing. Use it with Driver Handle YB-06071.
YB-06196 Driveshaft Needle Bearing Installer
and Remover
It removes and installs the needle bearing from the driveshaft
and propshaft bearing housing. Use it with Driver Handle
YB-06071.
FL/115 ~
F225
FL/115 ~
F225
YB-06175-2B Trim/Cylinder Wrench
It is used to remove most PTT cylinder end caps.
YB-06569 Tilt Rod Wrench
It is used with the Piston Vise Attachment YB-06572 to
remove the tilt pin eye to service, tilt cylinder end cap.
Photo not shown.
YB-06548 TNT Wrench, Showa System
It is used to remove or install the PTT cylinder end caps.
F40-4 ~
F/L115
1997 &
Up, V4,
V6 2.6L,
VX200/
225
F200/225
F40 ~ F60,
FL/115
F75 ~ F115
YB-06572 PTT Piston Vise Tool
Use it with Tilt Rod Wrench YB-06569 to remove the top pin
eyelet. It enables tilt cylinder end cap servicability.
YB-06548 Tilt Cylinder End Cap Wrench
It is used to remove or install the cylinder end cap.
POWER TRIM & TILT/MIDSECTION TOOLS