Specifications

SHOP EQUIPMENT

Part# Description/Use Application

YE-43937 Optimate III Battery Charger

The battery charger automatically tests flat batteries for

sulfated condition and, if necessary, applies a special high

voltage (max 22 volts) recovery action. It features a five stage

charging program with constant current, recharges batteries

discharged to as low as +/-2v even after a year of neglect, and

an interactive charging program reverts to bulk charge stage.

In addition, it has an unique 30 minute timer-controlled charge

verification stage and an unique 30 minute timer-

controlled check for self-discharge tendency. There is a

comp-rehensive selection of accessories for every need. Lastly,

it has a complete automatic protection against every user error.

All

YE-63070 Christie Shop Battery Charger

This battery charger is specifically designed for personal

watercraft and motorcycle batteries. This Shop unit charges 6

volt and 12 volt batteries with a maximum output of 10 amps.

Enough leads are included to charge up to 10 batteries at

once. All 10 charging circuits are individually fuse protected

to prevent damage. AC input is 115v/60Hz.

All

YE-63071 Replacement Cables with Clamps

(Sold in pk/ 5)

YE-63072 Receptacle Repair Kit

(includes: 5 receptacle plugs [molex connectors] and

10 female pins for repair of receptacle)

YE-43934 Battery Mate Charger

This battery charger is a combination load tester and

powerful constant current charger with automatic desulfating

action. It features six load test choices, 15A to 150 Amps, for

all batteries from 2.5Ah to 45Ah, and six constant current

settings from 1A to 9A for correct, most time-effective

charging. An optional wall mount is also available to save

bench space.

YE-43935 Optional Wall Mount Bracket