Troubleshooting guide

Common operations how-to
To copy a program from one location to another:
– select the program to copy
– click on '> Buffer'
– select the program to replace
– click on '> Prog'
To browse through a bank file without changing the device memory:
– click on 'Bank' / 'Load' and load the desired file.
– Double click on the program to audition
To insert a program of an other bank in the current bank (except for the DW8000):
– click on 'Bank' / 'Load' and load the desired file.
– Double click on the program to insert (it is copied in the Edit Buffer)
– click on 'Bank' / 'Request' to get the current bank
– select the program to replace
– click on '> Prog' to copy the Edit Buffer to this location
Note : this technique does not work if the device clears it edit buffer when the current bank is
requested (like for the DW8000). For this device, you have to save each program you like into
a 'single' file. After you have picked-up one or more programs, request the current bank and
load the chosen programs from files directly into the current bank.