User Manual

151
General Specifications
0 dBu is referenced to 0.775 Vrms.
*1: Measured peak SPL with pink noise @1 m.
*2: Dynamic: Total peak power of individual outputs. Measured at minimum load impedance, with protection released.
Burst/Continuous: Measured at nominal impedance, with protection activated.
*3: While both devices will work at a voltage of between 100 V to 240 V, as limiter settings vary depending on the supply voltage, make sure to
use this product at the supply voltage indicated on the rear panel of this product.
DZR315(-D) DZR15(-D) DZR12(-D) DZR10(-D)
System Type 3-way, Bi-amped
powered speaker,
Bass-reflex
2-way, Bi-amped powered speaker, Bass-reflex
Frequency Range (-10 dB) 31 Hz – 20 kHz 34 Hz – 20 kHz 39 Hz – 20 kHz 44 Hz – 20 kHz
Coverage Angle
H75° × V50°
H90° × V50°
(Rotatable)
H90° × V60°
(Rotatable)
H90° × V60°
(Rotatable)
Crossover Frequency, Type 700 Hz (FIR-X)
2.5 kHz (Passive)
1.7 kHz (FIR-X) 1.8 kHz (FIR-X) 1.8 kHz (FIR-X)
Maximum SPL
*1
143 dB SPL 139 dB SPL 139 dB SPL 137 dB SPL
Transducer LF 15" Cone,
3" Voice coil,
Neodymium magnet
15" Cone,
3" Voice coil,
Neodymium magnet
12" Cone,
3" Voice coil,
Neodymium magnet
10" Cone,
3" Voice coil,
Neodymium magnet
MF 8" Cone,
1.5" Voice coil,
Ferrite magnet
HF 2" Voice coil, 1" Throat compression driver, Titanium diaphragm, Neodymium magnet
Enclosure Material, Finish, Color Plywood, Durable polyurea coating, Black
Floor Monitor Angle 50° Symmetrical 50° Symmetrical 50°
Dimensions
(W × H × D, with rubber feet)
550 × 897 × 520 mm 450 × 761 × 460 mm 410 × 646 × 394 mm 315 × 537 × 345 mm
Weight 41.6 kg 25.2 kg 21.4 kg 17.9 kg
Handles
Aluminium die-cast, Side × 2
Aluminium die-cast,
Top × 1, Side × 1
Pole Socket Ø35 mm × 2 (0° or -7°)
Rigging Points M10 × 16 M10 × 12 M10 × 8, M8 × 2
Amplifier Type Class-D
Power Rating
*2
Dynamic 2000 W (LF:1000 W, MF/HF: 1000 W)
Burst (20ms) 1100 W (LF: 1000 W, MF/HF: 100 W)
Continuous 950 W (LF: 850 W, MF/HF: 100 W)
Cooling Fan cooling, Variable speeds.
DSP, AD/DA 96 kHz processing with 96 kHz AD/DA and FIR filter
Connectors Analog IN Combo × 2, Line level (Maximum +24 dBu), Input impedance: 20 kΩ
Analog OUT XLR3-32 × 2, CH1: THRU (fix), CH2: THRU or DSP OUT
Dante
(-D model only)
etherCON CAT5e × 2 (Daisy chain), 2 IN / 2 OUT (Fs: 44.1k, 48k, 88.2k, 96k) and
Remote control, 1000BASE-T
USB USB 2.0 host: 5 V 500 mA
AC IN IEC AC inlet × 1 (V-Lock)
Idle Power Consumption 45 W
1/8 Power Consumption 150 W
AC Power Requirements
*3
Depending on area of purchase; 100–240 V or 220–240 V, 50/60 Hz
Optional
Accessories
U-bracket
UB-DZR15H,
UB-DZR15V
UB-DZR12H,
UB-DZR12V
UB-DZR10H,
UB-DZR10V
Cover SPCVR-DZR315 SPCVR-DZR15 SPCVR-DZR12 SPCVR-DZR10
General Specifications (English only)