User Manual

Reference

56 USB: STORAGE FULL! Insufficient USB flash drive space. Use a USB flash drive with a sufficient amount of available space.

58 USB: LOAD ERROR

An error occurred while loading a file from a

USB flash drive. Internal data corruption may

have occurred within this product.

Please try again. A message appears on the display while the USB flash drive is being

accessed. Do not remove the USB flash drive while the message appears.

59 USB: OVER CURRENT

The power supply stopped due to excess cur-

rent flowing to the USB terminal.

Remove the USB flash drive from the USB terminal, and then turn on the power again.

65 INCOMPATIBLE DATA LOADED

Changed incompatible data contained within

the loaded file to the default settings.

—

70 POWER TURNED ON The power turned on. —

71 POWER TURNED OFF The power turned off. —

72 SHORT INTERRUPTION

Restarted system after performing a shutdown

due to an instantaneous power failure.

Connect to a stable power source.

73 HOST FIRMWARE UPDATE COMPLETED Firmware update completed. —

74 PANEL UNLOCKED Removed panel lock. —

77 PRESET RECALLED[*] Recalled preset. (*: Preset number) —

78 PRESET STORED[*] Stored preset. (*: Preset number) —

79 PRESET CLEARED[*] Cleared preset. (*: Preset number) —

80 BACKUP DATA LOADED

Loaded settings data from the USB flash drive

using RESTORE FROM USB on the DEVICE

BACKUP screen.

—

81 PIN CODE LOADED Loaded PIN code from the USB flash drive. —

82 PIN CODE CHANGED PIN code has been changed. —

83 WRONG PIN CODE Wrong PIN code entered. —

85 Dante FIRMWARE UPDATE COMPLETED Successfully updated the Dante firmware. —

ALL DATA INITIALIZED

All parameter settings reset back to their default

values.

—

91 —

Number Message Symptom Countermeasure