User Manual

Reference
35
ROUTER Routing SP OUT (On), — (Off) 
18
A1 <Analog OUTPUT 1> (On), — (Off) 
A2 <Analog OUTPUT 2> (On), — (Off) 
D1 <Dante OUTPUT 1> (On), — (Off) 
D2 <Dante OUTPUT 2> (On), — (Off) 
INPUT DNT. IN1 LVL
<Dante Input Level 1>
+1.0dB -∞, -80.0 to +10.0dB 
18
DNT. IN2 LVL
<Dante Input Level 2>
+1.0dB -∞, -80.0 to +10.0dB 
DNT. SENS.
(DANTE SENSITIVITY)
-14dBFS -14dBFS, -6dBFS 
ALIGNMENT
(DELAY ALIGNMENT)
OFF OFF, ON 
1.70ms 0.00ms to 20.00ms 
OUTPUT ANA. OUT1 LVL
<Analog Output Level 1>
0.0dB -∞, -80.0 to +10.0dB 
19
ANA. OUT2 LVL
<Analog Output Level 2>
0.0dB -∞, -80.0 to +10.0dB 
DNT. OUT1 LVL
<Dante Output Level 1>
0.0dB -∞, -80.0 to +10.0dB 
DNT. OUT2 LVL
<Dante Output Level 2>
0.0dB -∞, -80.0 to +10.0dB 
UTILITY PANEL SETUP BRIGHTNESS 6 1 to 10 19
CONTRAST
Full range: 5,
Subwoofer: 12
1 to 16 
20
BLACKOUT OFF OFF, ON 
PANEL LOCK PANEL LOCK OFF OFF, ON 
20
PIN CODE 0000 Four-digit numeral 
SAVE TO USB — — 
21
LOAD FROM USB — — 
DEVICE BACKUP SAVE TO USB — — 
23
RESTORE FROM USB — — 
Function Category Parameter Default value Setting range
Full range Subwoofer
Page
number
Standard Dante Standard Dante