Owner`s manual

Basic components
18
EMU26410
2-pin connector
AC 12 V-40/60/80W power is delivered
through this connector. When using it, keep
in mind the following points:
●
Use a genuine Yamaha connector.
●
Use lighting equipment only.
● Connect lighting equipment directly to the
2-pin connector.
●
Capacity of the lighting equipment must be
more than 12 V-40/60/80W; otherwise the
bulb could burn out.
●
When the connector is not in use, place
the cap on it.
CAUTION:
ECM01000
Do not connect the 2-pin connector di-
rectly to the battery terminals. Otherwise
the electric system will be damaged.
EMU26801
Warning system
CAUTION:
ECM00090
Do not continue to operate the engine if a
warning device has activated. Consult
your Yamaha dealer if the problem can-
not be located and corrected.
EMU26817
Overheat warning
This engine has an overheat-warning de-
vice. If the engine temperature rises too high,
the warning device will activate.
Activation of warning device
● The engine speed will automatically de-
crease to about 2000 r/min.
●
If equipped with an overheat-warning indi-
cator, it will light or blink.
●
The buzzer will sound (if equipped on the
tiller handle, remote control box, or main
switch panel).
If the warning system has activated, stop the
engine and check the cooling water inlet for
clogging.
ZMU04737
ZMU03025
ZMU03026