User Manual

EAD10 Owner’s Manual

Changing the Overall Settings

Setup Guide

Use the buttons below “ ” or “ ” ([F1] or

[F2]) to move the cursor.

Use the [–] or [+] buttons to adjust the value.

 Auto Power-Off

The Auto Power-Off function automatically turns off the Main Unit after a certain period of inactivity. The factory default is

set at 30 minutes.

 Auto Power-Off Quick Cancel

While holding down the [STORE] button, press the [ ]

(Standby/On) button to cancel the Auto Power-off. The func-

tion will remain off until you set a new Auto Power-Off time.

Changing the Overall Settings

NOTICE

• Unsaved data is lost when the Main Unit is turned off with the Auto Power-Off function. Always store data before turning

the power off.

• In certain modes of operation, the Auto Power-Off function will not turn off the Main Unit when the set time has elapsed.

So we recommend that you always turn off the Main Unit manually when you are finished using it.

• If you expect the Main Unit to be inactive for a certain length of time while connected to external audio equipment or a

PA, we recommend fully lowering the volume on the external equipment. Alternatively, you can disable the Auto Power-

Off function to ensure that the Main Unit stays on.

NOTE

To set the Auto Power-Off to a time other than 30 minutes, access the setting from the [MENU] button. (MENU/Utility/General)

Lower Higher