Operation Manual

INSTRUMENT AND CONTROL FUNCTIONS
4-7
1
2
3
4
5
6
7
8
9
Error warnings
If a problem is detected, the warning
light comes on. In this case, check for
the warning mark “ ”. If this warning
mark also appears, have a Yamaha
dealer check the vehicle.
Warning mark “ ”
This warning mark flashes if a problem
is detected. If the warning mark keeps
flashing after turning the key to “OFF”
and then back to “ON”, have a Yamaha
dealer check the vehicle.
TIP
After turning the key to “ON”, the warn-
ing mark appears. If the warning mark
goes out after a few seconds, there is
no malfunction. Go ahead with riding.
EAU50034
Using the security lock
The EC-03 is equipped with a security
lock that can be used by registering a
security number. Once the security
number has been set, the vehicle can-
not be ridden unless the correct securi-
ty number is entered, even if the key is
turned to “ON”.
Registering and changing the secu-
rity number
WARNING
EWA15611
Be sure to stop the vehicle before
registering or changing the security
number. Changing settings while
riding can distract the operator and
increase the risk of an accident.
TIP
The security number registration/
change mode is canceled if the regis-
tering procedure is not completed in
one minute. If the mode cancels, repeat
the procedure.
1. Turn the key to “ON”.
All display segments appear for a
few seconds, then the vehicle en-
ters the standby mode and
“PUSH” flashes.
TIP
When the security lock has been
locked, the security number indicator
“ LOCK” appears when the vehicle is
in the standby mode.
2. Change to the riding mode by
pushing any of the buttons.
1. Security lock indicator “ LOCK”
1
1CB-9-EA.book 7 ページ ２０１２年４月１１日 水曜日 午前９時３４分