Operation Manual

ManualsBrandsYamaha ManualsAutomotiveEC-03

PERIODIC MAINTENANCE AND ADJUSTMENT

8-12

2

3

4

5

6

7

8

9

2. Disconnect the headlight coupler,

and then remove the headlight

bulb cover.

3. Unhook the headlight bulb holder,

and then remove the burnt-out

bulb.

4. Place a new headlight bulb into po-

sition, and then secure it with the

bulb holder.

5. Install the bulb cover, and then

connect the coupler.

6. Install the headlight unit by install-

ing the screws.

7. Have a Yamaha dealer adjust the

headlight beam if necessary.

EAU24133

Replacing the tail/brake light

bulb

1. Remove the tail/brake light lens by

removing the screws.

2. Remove the burnt-out bulb by

pushing it in and turning it counter-

clockwise.

1. Screw

1. Headlight coupler

2. Headlight bulb cover

1

1

2

1. Headlight bulb holder

1

1. Tail/brake light lens

2. Screw

1

2

1CB-9-EA.book 12 ページ２０１２年４月１１日　水曜日　午前９時３４分