Owner`s manual

763-222a
1
16
763-226
1
761-078a
AE01023
CONNECTION
Alternating Current (AC)
Be sure any electric devices are turned off before
plugging them in.
9 Be sure all electric devices including the lines
and plug connections are in good condition
before connection to the generator.
9 Be sure the total load is within generator rated
output.
9 Be sure the receptacle load current is within
receptacle rated current.
1. Start the engine.
2. Plug in to the AC receptacle.
NOTICE
WARNING
3. Make sure the AC pilot light (green) is on.
1 AC pilot light (green)
4. Turn the economy control switch to ON and turn
on any electric devices.
1 I ON
TIP
The economy control switch must be turned to OFF
when using electric devices that require a large start-
ing current, such as a compressor or a submersible
pump.
7CG-28199-14 11.3.21 14:56 Page 16