Owner`s manual

AE01100
BATTERY CHARGING
Do not connect a VRLA (Valve Regulated Lead
Acid) battery. To charge a VRLA battery, a special
(constant-voltage) battery charger is required.
TIP
9 The generator DC rated voltage is 12V.
9 Start the engine first, and then connect the gener-
ator to the battery for charging.
9 Before starting to charge the battery, make sure
that the DC protector is turned on.
1. Start the engine.
NOTICE
2. Press in the DC protector.
1 “RESET”
2 “OFF”
3. Connect the red battery charger lead to the posi-
tive (+) battery terminal.
1 Red wire
2 Black wire
4. Connect the black battery charger lead to the neg-
ative (–) battery terminal.
5. Turn the economy control switch “OFF” to start
battery charging.
– 18 –
762-040
1
2
6v 6v
12v
762-041
763-238a
1
2
7CG-28199-14 11.3.21 14:56 Page 18