Owner`s manual

– 18 –
AE00839
Connection
Alternating Current (AC)
Be sure any electric devices are turned off before
plugging them in.
9 Be sure all electric devices including the lines
and plug connections are in good condition
before connection to the generator.
9 Be sure the total load is within generator rated
output.
9 Be sure the receptacle load current is within
receptacle rated current.
TIP
Make sure to ground (earth) the generator.
When the electric device is grounded, be sure to
ground the generator also.
1. Start the engine.
2. Plug in to AC receptacle.
NOTICE
WARNING
7DK-043
1
7DK-049
1
7DK-048
3. Make sure the AC pilot light 1 is on.
1 AC pilot light
4. Turn the economy control switch to “ON” 1.
1 I “ON”
5. Turn on any electric devises.
TIP
The economy control switch must be turned to “OFF” to
increase engine speed to rated r/min.
7DK-9-11_a 11.3.21 15:19 Page 18