Product Manual

1-4
Safety information
• Never touch the generator with wet hands or electri-
cal shock will occur.
• Connect the ground (earth) terminal to a ground
source. In order to prevent electrical shock, the gen
-
erator must be grounded when using an electrical
device with a ground plug.
Connection notes
• Avoid connecting the generator to commercial power
outlet.
• Avoid connecting the generator in parallel with any
other generator.
Connection
1
1. Ground (earth) terminal
1
2
1
2
1. Correct
2. Incorrect
Before the generator can be connected to a build-
ing’s electrical system, a licensed electrician must
install an isolation (transfer) switch in the build-
ing’s main fuse box. The switch is the connection
point for generator power and allows selection of
generator or main line power to the building. This
will prevent the generator from charging the main
power line (backfeeding) when the main power
supply has failed or has been turned off for line
repair. Backfeeding can electrocute or injure line
maintenance personnel. Also, generator and build-
ing electrical system damage can occur when nor-
mal operating power returns if unit is used without
an isolation switch.
WARNING
7PC-F8199-U0-E0.book 4 ページ ２０１９年５月２１日 火曜日 午後３時１１分