Product Manual

2-9

Controls and features

Boost mode switch

The boost mode switch raises up the number of rota-

tion of the engine temporarily (for approximately 60

seconds). When using devices that require a large

starting current, such as a compressor of a submers

ible pump or refrigerator, use this switch.

To enter the boost mode, push the boost mode switch

for 3 seconds. To exit the boost mode, push the boost

mode switch for 3 seconds again.

TIP

After approximately 60 seconds of the boost mode, the

generator will return to the normal mode automatically.

Twin Tech (parallel running terminal)

The Twin Tech terminals are used for connecting two

identical generators (EF2200iS) in parallel by using the

dedicated cable.

It cannot be connected to any other generator than the

EF2200iS.

When operating these two generators with identical

specifications in parallel, 3.6 kVA and 15.6 or 15.0 A

will be output.

TIP

For parallel operation, a separately-sold parallel cord

set is required. Before use, be sure to carefully read

the parallel cord set owner’s manual, which is included

with the parallel cord set.

Accessory socket

This generator has an accessory socket with a cover. It

is suitable for the use with portable electric devices.

1. Boost mode switch

1. Twin Tech (parallel running terminal)

A For Europe

B For Australia

1. Accessory socket

7PC-F8199-U0-E0.book 9 ページ２０１９年５月２１日　火曜日　午後３時１１分