Product Manual

5-3

Periodic maintenance

Engine oil replacement

1. Place the generator on a level surface and warm

up the engine for several minutes.

Then stop the engine, then turn the engine switch

to “

” (STOP) and fuel tank cap air vent lever to

“OFF”.

2. Remove the screws (for Europe). Or turn the panel

openers to disengage the lock (for Australia).

Avoid draining the engine oil immediately after

stopping the engine. The oil is hot and should be

handled with care to avoid burns.

WARNING

1. Screw

2. Panel opener

A For Europe

B For Australia

7PC-F8199-U0-E0.book 3 ページ２０１９年５月２１日　火曜日　午後３時１１分