Product Manual

5-10

Periodic maintenance

5. Wash the foam element with a foam air filter

cleaner and dry it.

6. Oil the foam element and squeeze out excess oil.

The foam element should be wet but not dripping.

7. Insert the foam element into the air filter case.

TIP

Be sure the foam element sealing surface matches the

air filter so there is no air leak.

8. Install the air filter case cover in its original position

and tighten the screw.

9. Install the panel.

10. Finger-tighten the panel openers to engage the

lock (for Australia). Or install the screws (for

Europe).

Do not wring out the foam element when squeezing

it.

This could cause it to tear.

Recommended oil:

Foam air filter oil or equivalent oil

The engine should never run without the foam ele-

ment; excessive piston and cylinder wear may

result.

NOTICE

Panel screw tightening torque:

1.5 N·m (0.15 kgf·m, 1.1 lb·ft)

7PC-F8199-U0-E0.book 10 ページ２０１９年５月２１日　火曜日　午後３時１１分