Owner`s manual

Table Of Contents

– 32 –

5. Remove the carbon deposits on the muffler screen

and the spark arrester using a wire brush.

When cleaning, use the wire brush lightly to avoid

damaging or scratching of the muffler screen and

spark arrester.

6. Check the muffler screen and the spark arrester.

Replace them if damaged.

7. Install the spark arrester.

TIP

Align the spark arrester lump to the hole in the muffler

pipe.

1 Spark arrester lump

2 Hole

8. Install the muffler screen and the muffler cap, and

then tighten the bolt.

9. Install the heat-protection cover and the cover, and

then tighten the bolts.

NOTICE

711-076

711-077

788-012

788-013

AIR FILTER

1. Remove the bolts and the cover.

1 Bolts

2 Cover

2. Remove the clips holding the air filter cover.

3. Remove the air filter cover and the air filter ele-

ment.

3 Clips

4 Air filter cover

Cover bolt tightening torque:

7 Nm (0.7 m·kgf, 5.1 ft·lbf)

711-075

7CH-9-15-b 11.12.6 10:43 AM Page 32