User Manual

16 ELA-1 Reference Manual
1
Voices
• Modulation Detail window (called up via the [1]–[3] buttons)
NOTE LFO (Low Frequency Oscillator) is a device which periodically varies (oscillates) a signal by using a low frequency wave. For example, a vibrato effect can
be produced by applying LFO to the pitch, a wah effect can be produced by applying it to the filter, and a tremolo effect can be produced by applying it to
the volume of a Voice.
 Effect/EQ page
• Effect Detail widow (called up via the [3]/[4] buttons)
The detailed settings for the selected DSP type can be made in this window. Select the desired parameter,
and then adjust the value.
Vibrato Vibrato is a quavering, vibrating sound effect that
is produced by regularly modulating the pitch of
the Voice.
Depth Determines the intensity of the Vibrato effect. Higher settings result in a
more pronounced Vibrato.
Speed Determines the speed of the Vibrato effect.
Delay Determines the amount of time that elapses between the playing of a key
and the start of the Vibrato effect. Higher settings increase the delay of
the Vibrato onset.
Modulation
(+)
The controller to which this function is assigned can be used to modulate the parameters
below as well as the pitch (vibrato). Here, you can set the degree to which the controller
modulates each of the following parameters.
Filter Determines the degree to which the joystick modulates the Filter Cutoff
Frequency. For details about the filter, see below.
Amplitude Determines the degree to which the joystick modulates the amplitude
(volume).
LFO Pitch Determines the degree to which the joystick modulates the pitch, or the
vibrato effect.
LFO Filter Determines the degree to which the joystick modulates the Filter modula-
tion, or the wah effect.
LFO
Amplitude
Determines the degree to which the joystick modulates the amplitude, or
the tremolo effect.
Reverb Depth Adjusts the reverb depth.
Chorus Depth Adjusts the chorus depth.
DSP Type Selects the DSP type which is applied when the DSP effect is turned on by
the [1] button.
Depth Adjusts the DSP depth.
EQ High Determines the “Frequency” and “Gain” of the EQ bands. For informa-
tion about EQ, refer to page 82.
EQ Low
Pitch
Delay
Speed
Depth
Time