User Manual

34 ELA-1 Reference Manual
2
Styles
Editing Data for Each Channel (Channel Edit)
The instructions below apply to step 6 of the Basic Procedure on page 28. On the “Channel Edit” page, you
can edit recorded data for each channel of the current Section selected on the “Basic” page or via the panel
buttons.
1 Select the channel to be edited via the [3]/[4] (Target Channel) buttons.
The selected channel is shown at the upper left of the display.
2 Use the Cursor buttons to select the item to be edited, and then press the [ENTER]
button to call up the Edit display.
3 Edit the desired parameter, and then press the [6] (Execute) button to actually enter
the edits for each setup window.
When execution is completed, this button changes to “Undo,” letting you restore the original data if you
are not satisfied with the results. The Undo function only has one level; only the immediately previous
operation can be undone.
Groove This lets you add swing to the music or change the “feel” of the beat by making subtle
shifts in the timing (clock) of the Style. The Groove settings are applied to all channels of
the selected Section.
Original
Beat
Specifies the beats to which Groove timing is to be applied. In other
words, if “8Beat” is selected, Groove timing is applied to the 8th notes; if
“12 Beat” is selected, Groove timing is applied to 8th-note triplets.
2
1