User Manual

46 ELA-1 Reference Manual
3
Live Expression Control
Mixer Insertion Effect
Depth
Adjusts the Insertion Effect depth of the selected parts.
EQ High Gain Boosts or attenuates the high EQ band for the selected parts.
EQ Low Gain Boosts or attenuates the low EQ band for the selected parts.
Cutoff Adjusts the cutoff frequency of the filter for the selected parts.
Resonance Adjusts the resonance of the filter for the selected parts.
Cutoff &
Resonance
Adjusts the cutoff frequency and resonance of the filter for the selected
parts.
Filter Adjusts the parameters such as the cutoff frequency and resonance of the
filter for the selected parts. However, the parameters do not change
uniformly, but are specially programmed to change individually for
optimum sound, letting you filter the sound for the best musical results.
Voice Attack Adjusts the length of time until the selected parts reach their maximum
level after the key is played.
NOTE Some Voices may not be affected by the setting here.
Release Adjusts the length of time until the selected parts decay to silence after the
key is released.
Attack & Release Adjusts both the Attack and Release time of the selected parts.
Modulation
*1
Applies vibrato and other effects to notes played on the selected parts.
Tuning Determines the pitch of the selected parts.
Octave Determines the range of the pitch change in octave for the selected parts.
Pitch Bend
*2
Allows you to bend the pitch of notes up or down by using the Second
Expression Pedal. You can set the pitch bend range for each part in the
pop-up window called up via the [1]/[2] (Detail Settings) buttons. The
range is from “0” to “12,” with each step corresponding to one semitone.
Pitch Bend Up
*1
Allows you to bend the pitch of notes up by using the Expression Pedal.
You can set the pitch bend range for each part in the pop-up window called
up via the [1]/[2] (Detail Settings) buttons. The range is from “0” to “12,”
with each step corresponding to one semitone.
Pitch Bend Down
*1
Allows you to bend the pitch of notes down by using the Expression Pedal.
You can set the pitch bend range for each part in the pop-up window called
up via the [1]/[2] (Detail Settings) buttons. The range is from “0” to “12,”
with each step corresponding to one semitone.
Pitch Bend Range Determines the pitch bend range for the selected parts.
Portamento Time Controls the portamento time (page 14) parameter of each part.
Pedal Control
(Wah)
Applies a wah effect to notes played on the selected parts.
NOTE This is effective only when an effect whose category is “Modulation” and whose type is “PedalWah”
or “PWah+Dist” is applied.
Category Function Description