User Manual

ManualsBrandsYamaha ManualsElectoneELA-1

Table Of Contents

54 ELA-1 Reference Manual

Multi Pads

5 Select the desired audio file.

NOTE By pressing the [5] (Info) button in the File Selection display, you can confirm the audio file information (title name, bit rate and sample rate, etc.).

6 Press the [EXIT] button to return to the “Audio Link Multi Pad” display.

NOTE By pressing the [7] (Info) button, you can confirm the file path of the selected Pad.

7 If you want to link other audio files to other pads, repeat steps 4 to 6.

8 If desired, adjust the volume level of each audio file by using the [4]/[5] (Audio Level)

buttons.

You can adjust the volume while playing back the Multi Pad phrase by pressing the [6] (R) button.

9 Press the [8] buttons to save the Audio Link Multi Pad settings as a Multi Pad Bank.

NOTICE

The setting will be lost if you select another Audio Link Multi Pad or turn the power to the instrument off without carrying out the Save

operation.

Press the [EXIT] button to check the new Audio Link Multi Pad in the Multi Pad Bank

Selection display.

The newly created Audio Link Multi Pad is marked with an “Audio Link” indication at the upper left of

the file name.

Playing the Audio Link Multi Pads

You can play the Multi Pad to which the audio file is assigned by selecting them in the User or USB tab of the

Multi Pad Bank Selection display. Although you can play them via the same operations as the Multi Pad

which has no links with audio files, note the following limitations.

• Make sure to connect the USB flash drive including the corresponding audio files.

• Automatic repeat playback is not available.

• Only one Pad can be played back at once.

• Chord Match cannot be applied.

• The USB Audio function cannot be used while playing Audio Link Multi Pads.

NOTE Audio files (WAV) take a slightly longer time than MIDI files to load.

NOTE When the link to the audio file is cut (for example, when the USB flash drive which includes the corresponding audio file is not connected, etc.), a “?” icon is

shown for that Pad in the “Audio Link Multi Pad” display.

To change the Link setting:

Select the desired Audio Link Multi Pad, and then carry out the same operations as in steps 3 to 10.