User Manual

60 ELA-1 Reference Manual
5
Songs
The instrument has a variety of Song playback functions—repeat playback, various guide settings, etc.—
which can be accessed in the display below.
1 Call up the operation display.
[SONG FUNCTION] → [1]/[2] (Files) → [6] (Settings)
2 Make necessary settings.
Song Playback Related Settings (Channel settings, Repeat set-
tings, etc.)
Repeat Mode Determines the method of repeat playback.
• Off: Plays through the selected Song, then stops.
• Single: Plays through the selected Song repeatedly.
• All: Continues playback through all the Songs in the selected folder repeat-
edly.
• Random:
Continues playback at random through all the Songs in the selected
folder repeatedly.
Fast Forward Type Determines the fast forward type of when pressing the [H] (Fast forward) but-
ton during Song playback.
• Jump: Pressing the [H] (Fast forward) button once instantly sets the play-
back position to the next measure without sounding. Holding the [H] (Fast
forward) button scrolls forward continuously.
• Scrub: Pressing and holding the [H] (Fast forward) plays and sounds the
Song at high speed.
Quick Start On some commercially available Song data, certain settings related to the Song
(such as Voice selection, volume, etc.) are recorded to the first measure, before
the actual note data. When “Quick Start” is set to “On,” the instrument reads all
initial non-note data of the Song at the highest possible speed, then automati-
cally slows down to the appropriate tempo at the first note. This allows you to
start playback as quickly as possible, with a minimum pause for reading of
data.
Phrase Mark Repeat Phrase Mark is a pre-programmed part of some Song data, which specifies a
certain location (set of measures) in the Song. When this is “On,” the section
corresponding to the specified Phrase Mark number is repeatedly played back.
This parameter is available only when the Song containing Phrase Mark set-
tings is selected.