User Manual

ELA-1 Reference Manual 63
5
Songs
6 Press the [8] button to carry out the Save operation.
For details, refer to “Basic Operations” in the Owner’s Manual.
NOTICE
The edited Song data will be lost if you select another Song or turn off the power to the instrument without carrying out the Save opera-
tion.
Re-recording a Specific Section—Punch In/Out (“Rec Mode” page)
When re-recording a specific section of an already-recorded Song, use the Punch In/Out function. In this
method, only the data between the Punch In point and the Punch Out point is overwritten with the newly
recorded data. Keep in mind that the notes before and after the Punch In/Out points are not recorded over,
although you will hear them play back normally to guide you in the Punch In/Out timing.
NOTE The Style Retrigger function (page 49) cannot be used when recording over existing data (overdubbing).
1 Select the desired Song for re-recording.
2 Call up the operation display.
[MENU] → Cursor buttons [][][E][F] Song Creator, [ENTER] → TAB [l] Rec Mode
3 Determine the settings for recording.
Rec Start
(Punch In)
Determines the recording start behavior.
• Normal: Overwrite recording starts when the Song playback is started via the
SONG CONTROL [F/ K]] (Play/Pause) button or when you play the key-
board in the Synchro Standby mode.
• First Key On: The Song plays back normally, and then starts overwrite record-
ing as soon as you play the keyboard.
Punch In
At
The Song plays back normally up to the beginning of the indicated Punch In
measure specified here, and then starts overwrite recording at that point.
Rec Stop
(Punch Out)
Determines the recording end behavior, or how data is handled after recording is
stopped.
• Replace All: This deletes all data after the point at which recording is stopped.
• Punch Out: The Song position at which recording is stopped is regarded as the
Punch Out point. This setting maintains all data after the point at which record-
ing is stopped.
Punch
Out At
Actual overwrite recording continues until the beginning of the specified Punch
Out measure specified here, at which point recording stops and normal playback
continues. This setting maintains all data after the point at which recording is
stopped.
4 7