User Manual

ELA-1 Reference Manual 74
8
Registration Memory/Playlist
4 Press one of the [7]/[8] (Shift End Settings) buttons to set how Registration Sequence
behaves when reaching the end of the sequence.
5 Press the [8] (OK) button to close the window.
6 Call up the Registration Bank Selection display by using the BANK [+]/[−] buttons, and
then save the Registration Sequence data to the current Bank file.
NOTICE
Settings in the “Registration Sequence” display will be lost if you select another Registration Bank without carrying out the Save opera-
tion.
Manually Using the Registration Sequence
You can switch the Registration Memory numbers in sequence by pressing one of the [4]/[5] (Prev.) or [7]/
[8] (Next) buttons in the Quick Access area “Regist Sequence” or by using the Footswitches.
1 Select the desired Registration Bank.
2 On the Quick Access area “Regist Sequence” of the Main display, confirm the
Registration Sequence and make sure that [1] (Auto) is turned off.
3 If you intend to use a Footswitch or Footswitches to switch the Registration Memory
number, assign “Registration Sequence +” and/or “Registration Sequence −” to the
desired Footswitch (page 50).
4 Use the [4]/[5] (Prev.) and [7]/[8] (Next) buttons on the Main display, or press the
Footswitches to select the first Registration Memory number.
The selected number is highlighted.
5 Use the [4]/[5] (Prev.) and [7]/[8] (Next) buttons or Footswitches during your keyboard
performance.
To return to the status in which no Registration Memory number is selected, press one of the [4]/[5]
(Prev.) buttons repeatedly.
NOTE The Footswitch can be used for Registration Sequence even when the Main display is not shown.
Shift
End
Stop The sequence cannot be advanced. It stops at the end.
Top The sequence starts again at the beginning.
Next Bank The sequence automatically moves to the beginning of the next Registration
Memory Bank in the same folder.
Position (Bar, Beat)If “Top” or “Next Bank” is selected above, the next sequence starts at the tim-
ing of the setting made here when the current sequence reaches to the end.
NOTE It may be better to set Position to a point slightly earlier than you expect, because it may take some time to
advance to the next sequence. When using the Auto Sequence function (page 76) and “Next Bank” is
selected above, the next sequence (or next Style) starts from the bar in which the data is readied.